Gs1 Datamatrix Enable - Datalogic Magellan 1500i Product Reference Manual

ENTER/EXIT PROGRAMMING MODE

GS1 Datamatrix Enable

Enables/disables the ability of the scanner to decode GS1 Datamatrix labels.
To set this feature:
1. Scan the Enter/Exit Programming Mode barcode at the top of the page.
2. Scan either the enable or disable barcode below. You'll need to cover any unused bar‐
codes on this and the facing page to ensure that the scanner reads only the barcode
you intend to scan.
3. Complete the programming sequence by scanning the Enter/Exit Programming Mode
barcode.
DEFAULT
047401CR)
GS1 Datamatrix enabled
262
MAGELLAN™ 1500I
047400(CR)
GS1 Datamatrix disabled