Led And Beeper Indicators - Datalogic Magellan 1500i Product Reference Manual

LED AND BEEPER INDICATORS

LED AND BEEPER INDICATORS
The scanner's beeper sounds and its green LED illuminates to indicate various functions or
errors on the scanner. The tables below list these indications. The scanner's functions are
programmable, and so may or may not be turned on. For example, certain indications such
as the power‐up beep can be disabled using programming barcode labels.
LED
INDICATION
INDICATION
Power-on 
Bright green flash
indication
Good Read
Bright green flash
Indication
Scanner Ready Constant dim green
Green LED slowly and continu-
Sleep Mode ously changes from off to dim to
off.
Constant green flash at 1 Hz
Host Disable
(100mS on, 900mS off)
Varies (see
Diagnostics page A-303 for more informa-
tion)
Prog. Mode See Host Disable above.
BEEPER
INDICATION
INDICATION
Power On Beep Single beep
Good Read
Single beep
Indication
Varies (see
Diagnostics
more information)
Programming
Varies depending upon the fea-
Mode 
ture(s) being configured.
Indications
302
MAGELLAN™ 1500I
COMMENT
Indicates the scanner has finished all its power up tests
and is now ready for operation.
Indicates a barcode has been read and decoded.
The scanner is ready for operation. The LED is also con-
figurable to off when idle and ready for operation
The scanner is in Sleep Mode. To wake the scanner up,
move an object in front of its window or press the button
atop the unit. This indication is configurable and may be
programmed to behave differently.
The scanner is disabled due to receiving a disable com-
mand from the POS terminal.
"Error Codes" on
The LED can provide diagnostic feedback if the scanner
discovers a problem during SelfTest.
The scanner is in Programming Mode.
COMMENT
The Power-On Beep indication is a configurable feature
which can be enabled or disabled. When enabled, this
beep Indicates the scanner has finished all its power up
tests and is now ready for operation.
The good read beep indication is configurable. Options
include: Enable/disable, frequency, duration and volume.
See
information.
for The Beeper can provide diagnostic feedback if the scan-
"Error Codes"
ner discovers a problem during SelfTest.
The Beeper will sound as programming barcode labels
are scanned, indicating progress during scanner configu-
ration.
LED and Beeper Indicators on page 57 for more