Upc-A; Upc-A Enable - Datalogic Magellan 1500i Product Reference Manual

UPC-A

UPC-A

UPC-A Enable

Enables/disables the ability of the scanner to decode UPC‐A labels.
To set this feature:
1. Scan the Enter/Exit Programming Mode barcode at the top of the page.
2. Scan either the enable or disable barcode below. You'll need to cover any unused bar‐
3. Complete the programming sequence by scanning the Enter/Exit Programming Mode
02D001(CR)
UPC-A = Enable
PRODUCT REFERENCE GUIDE
codes on this and the facing page to ensure that the scanner reads only the barcode
you intend to scan.
barcode.
ENTER/EXIT PROGRAMMING MODE
02D000(CR)
UPC-A = Disable
DEFAULT
129