Pdf 417 Length 1, Length 2 Programming Instructions - Datalogic Magellan 1500i Product Reference Manual

PDF 417

PDF 417 Length 1, Length 2 Programming Instructions

If PDF417 Length Control is set to Fixed‐Length decoding, this feature specifies PDF417 first
fixed length. If PDF417 Length Control is set to Variable‐Length decoding, this feature speci‐
fies the minimum label length.
NOTE
To set this feature:
1. Scan the Enter/Exit Programming Mode barcode at the top of the page.
2. Scan the barcode,
3. Scan the appropriate digits from the
4. Complete the programming sequence by scanning the ENTER/EXIT Programming
05A7(CR)
Set PDF 417 Length 2
Default setting for this feature = 0A96 (length = 2710)
PRODUCT REFERENCE GUIDE
This tag is only valid for units with a model ID that supports PDF.
Length 1 is the minimum label length if in variable length mode, or the
first fixed length if in fixed length mode. Length 2 is the maximum
label length if in variable length mode, or the second fixed length if in
fixed length mode. Length includes the barcode's data characters only.
Any value > 2710 will be considered to be 2710.
Set PDF 417 Length 1 on page 265
below. You'll need to cover any unused barcodes on this and the facing page to
265
ensure that the scanner reads only the barcode you intend to scan.
sent the desired label length. The selectable range for this option is 0001 to 2710. Pad
all numbers with leading zeros to yield a four‐digit entry (0001‐2710).
Mode barcode.
ENTER/EXIT PROGRAMMING MODE
or
Set PDF 417 Length 2 on page
Alpha-Numeric Keypad in Appendix C
05A6(CR)
Set PDF 417 Length 1
Default setting for this feature = 0001
that repre‐
265