Msi Minimum Read - Datalogic Magellan 1500i Product Reference Manual

ENTER/EXIT PROGRAMMING MODE

MSI Minimum Read

This feature specifies the minimum number of consecutive MSI decodes before is accepted
as good read.
To set this feature:
1. Scan the Enter/Exit Programming Mode barcode at the top of the page.
2. Scan your selection from the barcodes below. You'll need to cover any unused bar‐
codes on this and the facing page to ensure that the scanner reads only the barcode
you intend to scan.
3. Complete the programming sequence by scanning the ENTER/EXIT Programming
Mode barcode.
DEFAULT
00BF02(CR)
MSI Minimum Read = 2
00BF04(CR)
MSI Minimum Read = 4
246
MAGELLAN™ 1500I
00BF01(CR)
MSI Minimum Read = 1
00BF03(CR)
MSI Minimum Read = 3