ENTER/EXIT PROGRAMMING MODE
EAN-13
EAN-13 Enable
Enables/disables the ability of the scanner to decode EAN/JAN‐13 labels.
To set this feature:
1. Scan the Enter/Exit Programming Mode barcode at the top of the page.
2. Scan either the enable or disable barcode below. You'll need to cover any unused bar‐
codes on this and the facing page to ensure that the scanner reads only the barcode
you intend to scan.
3. Complete the programming sequence by scanning the Enter/Exit Programming Mode
barcode.
02D301(CR)
EAN-13 = Enable
140
MAGELLAN™ 1500I
02D300(CR)
EAN-13 = Disable
DEFAULT