Msi Length 1 - Datalogic Magellan 1500i Product Reference Manual

ENTER/EXIT PROGRAMMING MODE

MSI Length 1

If MSI Length Control is set to Fixed‐Length decoding, this feature specifies MSI first fixed
length. If MSI Length Control is set to Variable‐Length decoding, this feature specifies the
minimum label length.
To set this feature:
1. Scan the Enter/Exit Programming Mode barcode at the top of the page.
2. Scan the barcode,
unused barcodes on this and the facing page to ensure that the scanner reads only
the barcode you intend to scan.
3. Scan the appropriate digits from the
sent the desired label length. The selectable range for this option is 4 to 16. Pad all
single digit numbers with a leading zero to yield a two‐digit entry (04‐16).
4. Complete the programming sequence by scanning the ENTER/EXIT Programming
Mode barcode.
DEFAULT
248
MAGELLAN™ 1500I
Set MSI Length 1 on page 248
Alpha-Numeric Keypad in Appendix C
00CB(CR)
Default setting for this feature = 04
below. You'll need to cover any
Set MSI Length 1
that repre‐