Standard 2 Of 5 Length 2 - Datalogic Magellan 1500i Product Reference Manual

STANDARD 2 OF 5

Standard 2 of 5 Length 2

If Standard 2 of 5 Length Control is set to Fixed‐Length decoding, this feature specifies Stan‐
dard 2 of 5 second fixed length. If Standard 2of 5 Length Control is set to Variable‐Length
decoding, this feature specifies the maximum label length.
To set this feature:
1. Scan the Enter/Exit Programming Mode barcode at the top of the page.
2. Scan the barcode,
3. Scan the appropriate digits from the
4. Complete the programming sequence by scanning the ENTER/EXIT Programming
DEFAULT
PRODUCT REFERENCE GUIDE
When in Fixed Length mode, if Length 2 is set to the value of 00
(zero), then only Length 1 will apply.
NOTE
Set Standard 2 of 5 Length 2 on page 257
any unused barcodes on this and the facing page to ensure that the scanner reads
only the barcode you intend to scan.
sent the desired label length. The selectable range for this option is 1 to 50. Pad all
single digit numbers with a leading zero to yield a two‐digit entry (01‐50).
Mode barcode.
ENTER/EXIT PROGRAMMING MODE
below. You'll need to cover
Alpha-Numeric Keypad in Appendix C
0499(CR)
Set Standard 2 of 5 Length 2
Default setting for this feature = 32 (length = 50)
that repre‐
257