Databar Expanded Length 2 - Datalogic Magellan 1500i Product Reference Manual

ENTER/EXIT PROGRAMMING MODE

DataBar Expanded Length 2

Length 2 is the maximum label length if in variable length mode, or the second fixed length
if in fixed length mode. Length includes the barcode's data characters only.
To set this feature:
1. Scan the Enter/Exit Programming Mode barcode at the top of the page.
2. Scan the barcode,
cover any unused barcodes on this and the facing page to ensure that the scanner
reads only the barcode you intend to scan.
3. Scan the appropriate digits from the
sent the desired label length. The selectable range for this option is 00 to 74. Pad all
single digit numbers with a leading zero to yield a two‐digit entry (00‐74).
4. Complete the programming sequence by scanning the ENTER/EXIT Programming
Mode barcode.
DEFAULT
194
MAGELLAN™ 1500I
When in Fixed Length mode, if Length 2 is set to the value of 00
(zero), then only Length 1 will apply.
NOTE
Set DataBar Expanded Length 2 on page 194
Alpha-Numeric Keypad in Appendix C
04BF(CR)
Set DataBar Expanded Length 2
Default setting for this feature = 4A (length = 74)
below. You'll need to
that repre‐