Code 39 Length 1 - Datalogic Magellan 1500i Product Reference Manual

CODE 39

Code 39 Length 1

If Code 39 Length Control is set to Fixed‐Length decoding, this feature specifies Code 39
first fixed length. If Code 39 Length Control is set to Variable‐Length decoding, this feature
specifies the minimum label length.
To set this feature:
1. Scan the Enter/Exit Programming Mode barcode at the top of the page.
2. Scan the barcode,
3. Scan the appropriate digits from the
4. Complete the programming sequence by scanning the ENTER/EXIT Programming
DEFAULT
PRODUCT REFERENCE GUIDE
Set Code 39 Length 1 on page 203
unused barcodes on this and the facing page to ensure that the scanner reads only
the barcode you intend to scan.
sent the desired label length. The selectable range for this option is 00 to 50. Pad all
single digit numbers with a leading zero to yield a two‐digit entry (00‐50).
Mode barcode.
ENTER/EXIT PROGRAMMING MODE
below. You'll need to cover any
Alpha-Numeric Keypad in Appendix C
04B2(CR)
Set Code 39 Length 1
Default setting for this feature = 02
that repre‐
203