Qr Code; Qr Code Enable - Datalogic Magellan 1500i Product Reference Manual

QR CODE

QR CODE

QR Code Enable

Enables/disables the ability of the scanner to decode QR Code labels.
To set this feature:
1. Scan the Enter/Exit Programming Mode barcode at the top of the page.
2. Scan either the enable or disable barcode below. You'll need to cover any unused bar‐
3. Complete the programming sequence by scanning the Enter/Exit Programming Mode
DEFAULT
03D701(CR)
QR Code = Enable
PRODUCT REFERENCE GUIDE
codes on this and the facing page to ensure that the scanner reads only the barcode
you intend to scan.
barcode.
ENTER/EXIT PROGRAMMING MODE
03D700(CR)
QR Code = Disable
271