Rear View - Lightware MMX8x4-HT420M User Manual

   
2. Product Overview
2.2. Rear View
MMX8x4-HT400MC
Sn:
HDMI OUT 1 HDMI
Made in EU, Hungary
100-240 VAC TPS IN 1
TPS LINK
50/60 Hz 1.4-0.85A
t
MMX8x4-HT420M
y
Sn:
Made in EU, Hungary
100-240 VAC
50/60 Hz 1.4-0.85A
t r
Rear View Legend
Infra output ports 3.5 mm Jack plugs for infra signal transmission (all of them are outputs).
1
Serial/Infra 2-pole Phoenix connectors (2x) for IR output or TTL output serial signal.
2
output ports
48 V LED On
3
Off
RS-232 port 3-pole Phoenix connectors (2x) for bi-directional RS-232 communication. Local
4
control functions (e.g. Lightware Device Controller software) and message sending
are also possible via RS-232 port. See more details in
Reset button Reboots the matrix; the same as switching it off and on again.
5
Control Ethernet RJ45 connector to control the matrix via LAN.
6
port See more details in
1
o 2 3
4 3 RS232
I I R R O O U U T T
4 3 2 1
TX TX
MIC IN
48V
OUT 2 HDMI OUT 3 HDMI OUT 4
HDMI IN 5 HDMI IN 6 HDMI
TPS IN 2 TPS IN 3 TPS IN 4
e w
u i o 1 2 3
4 3 RS232
R R I I O O U U T T
6 5 4 3 2 1
TX TX
MIC IN
e
w
This LED lights, when phantom power is turned on.
The phantom power is turned off.
RS-232 Connector
Control Ethernet Port section.
MMX8x4-HT series – User's Manual
7
5 6 7
4
8
2 1
Boot
Reset
TX RX TX RX Control
ETHERNET
AUDIO IN
9
L R 8
AUDIO OUT
L R 9
IN 7 HDMI IN 8
q
w
e
4 5 6 7
2 1
r
Reset
TX RX TX RX
AUDIO IN
8
L R
AUDIO OUT
9
t
q
y
u
i
o
section.
Applied firmware package: v1.3.0 | LDC software: v2.4.2
Bootload button Hidden button for bootload mode (keep pressed the boot button and turn on the
matrix to take it bootload mode).
Advanced audio 3- pole Phoenix connector for microphone input and 5-pole Phoenix connector for
input ports balanced analog audio input. See details about the audio features in
section.
Advanced audio 5-pole Phoenix connector for balanced analog audio; the signal can be the
output port embedded audio from the TPS or HDMI inputs or from the microphone input or
from the line in. See details about the audio features in
Audio inputs/ 5-pole Phoenix connector for balanced analog audio; depending on the
outputs configuration, it can be input or output. Output audio is the de-embedded HDMI
signal from the nearby HDMI port. See details about the audio features in
Audio Interface section.
HDMI inputs HDMI input ports for sources.
TPS inputs RJ45 connectors for incoming TPS signal.
MMX8x4-HT400MC and model is not PoE-compliant.
▪
▪ MMX8x4-HT420M model is PoE-compliant.
TPS Ethernet Locking RJ45 connector to supply Ethernet communication for the TPS lines – it can
be separated from the LAN communication (controlling functions) of the matrix. Not
PoE-compliant. Pin assignment can be found in
Ports section.
AC connector Local power in; standard IEC connector accepting 100-240 V, 50 or 60 Hz.
TPS Outputs RJ45 connectors for TPS signal; PoE-compliant.
GPIO 8-pole Phoenix connector for configurable general purpose input/output ports.
Pin assignment can be found in the
Relay 8-pole Phoenix connector for relay ports. Pin assignment can be found in the
Relay Connector section.
HDMI outputs HDMI output connectors for sinks.
17
Audio Interface
Audio Interface section.
Ethernet Link to TPS Input/Output
GPIO - General Purpose Input/Output Ports.