Ethernet Tool Kit; Device Filter Based On Mac Address; Lw2 Control Port Blocking; Http Port Blocking - Lightware MMX8x4-HT420M User Manual

   
8. LW3 Programmers' Reference
8.24. Ethernet Tool Kit
DIFFERENCE:
This feature and below commands are available from FW package v1.3.0.
8.24.1. Device Filter Based on MAC Address
You can create a list of network devices based on the MAC address which are allowed controlling the device,
or querying parameters to/from the Lightware
Command and Response
SET·/MANAGEMENT/MACFILTER.MACaddress<loc>=<MAC_address>;<receive>;<send>;<name>
ç
pw·/MANAGEMENT/MACFILTER.MACaddress<loc>=<MAC_address>;<receive>;<send>;<name>
æ
The filter is disabled as default. Set the FilterEnable property to true as shown in the example.
Parameters
Parameter Parameter description
<loc> Location of the address
<MAC_address> The MAC address of the
device
<receive> Enable/disable the
parameter querying option
<send> Enable/disable the
parameter setting option
<name> Unique name for the better
identification (optional)
Example
ç SET /MANAGEMENT/MACFILTER/MACaddress4=(04:D4:C4:4D:01:43;1;1;Tech)
æ pw /MANAGEMENT/MACFILTER/MACaddress4=(04:D4:C4:4D:01:43;1;1;Tech)
ç SET /MANAGEMENT/MACFILTER.FilterEnable=true
æ pw /MANAGEMENT/MACFILTER.FilterEnable=true
New MAC address is saved into the 4th property with name 'Tech', which may query/set parameters from/in
the Lightware device. The FilterEnable property is set to true, thus, the filter is enabled.
device. #macfilter
Values Value description
1-8 The default values of 1, 2 and 3 ensure that
address resolution and device discovery
continue to work after enabling the MAC
filter
Unique value Hex format, divided by a colon
false (or 0) The device is not allowed to query
parameters from the LW device
true (or 1) The device is allowed to query parameters
from the LW device
false (or 0) The device is not allowed to change
parameters in the LW device
true (or 1) The device is allowed to change parameters
in the LW device
Any string Up to 5 ASCII characters (longer names
are truncated)
Applied firmware package: v1.3.0 | LDC software: v2.4.2
MMX8x4-HT series – User's Manual
8.24.2. LW2 Control Port Blocking
This command is for blocking the LW2 control port; it is an additional protection for the Cleartext login function.
Command and Response #portblock
SET·/MANAGEMENT/SERVICEFILTER.Lw2Enabled=<port_mode>
ç
pw·/MANAGEMENT/SERVICEFILTER.Lw2Enabled=<port_mode>
æ
Example
ç SET /MANAGEMENT/SERVICEFILTER.Lw2Enabled=false
æ pw /MANAGEMENT/SERVICEFILTER.Lw2Enabled=false
8.24.3. HTTP Port Blocking
This command is for blocking the HTTP port (80); it is an additional protection for the Cleartext login function.
Command and Response
SET·/MANAGEMENT/SERVICEFILTER.HttpEnabled=<port_mode>
ç
pw·/MANAGEMENT/SERVICEFILTER.HttpEnabled=<port_mode>
æ
Example
ç SET /MANAGEMENT/SERVICEFILTER.HttpEnabled=true
æ pw /MANAGEMENT/SERVICEFILTER.HttpEnabled=true
8.24.4. HTTP Post Receiving Blocking
This command is for blocking HTTP posts; it is an additional protection for the Cleartext login function.
Command and Response
SET·/MANAGEMENT/SERVICEFILTER.HttpEnabled=<port_mode>
ç
pw·/MANAGEMENT/SERVICEFILTER.HttpEnabled=<port_mode>
æ
Example
ç SET /MANAGEMENT/SERVICEFILTER.HttpEnabled=true
æ pw /MANAGEMENT/SERVICEFILTER.HttpEnabled=true
151