Query The Status Of Destination Port; Query The Video Autoselect Settings; Change The Autoselect Mode; Query The Input Port Priority - Lightware MMX8x4-HT420M User Manual

   
8. LW3 Programmers' Reference
8.7.13. Query the Status of Destination Port
Command and Response
ç GET·/MEDIA/XP/VIDEO.DestinationPortStatus
pr·/MEDIA/XP/VIDEO.DestinationPortStatus=<out1_state>;<out2_state>;<...>;<out#_state>
æ
Parameters
<out#_state> The responses contain one letter and a 1-byte long HEX code showing the current state of the
output ports. See the Legend in

INFO: The response depends on the number of the output ports. MMX8x4-HT400MC and MMX8x4-HT420M
models have 4 output ports, MMX8x8-HDMI-4K-A model has 8 output ports.
Example
ç GET /MEDIA/VIDEO/XP.DestinationPortStatus
æ pr /MEDIA/VIDEO/XP.DestionationPortStatus=L00AA;T00AE;T00AF;T00AA;T00AB
INFO:
Output 5 in MMX8x4-HT400MC and MMX8x4-HT420M models means the advanced analog audio output.
8.7.14. Query the Video Autoselect Settings
Command and Response
ç GET·/MEDIA/VIDEO/XP.DestinationPortAutoselect
pr·/MEDIA/VIDEO/XP.DestinationPortAutoselect=<out1_set>;<out2_set>;<...>;<out#_set>
æ
The response shows the settings of each output one by one.
Parameters
Identifier Parameter description
<out#_set> Two-letter code of the
Autoselect settings
Example
ç GET /MEDIA/VIDEO/XP.DestinationPortAutoselect
æ pr /MEDIA/VIDEO/XP.DestinationPortAutoselect=DP;EP;EF;DP;DP
DP: the autoselect is Disabled on output 1, output 4, and output 5.
EP: the Autoselect is Enabled on output 2 (selected mode is Priority detect).
EF: the Autoselect is Enabled on output 3 (selected mode is First detect).

INFO: For more information see
INFO:
Output 5 in MMX8x4-HT400MC and MMX8x4-HT420M models means the advanced analog audio output.
Query the Status of Source Port section.
Parameter values
1 st letter E: Autoselect is enabled
D: Autoselect is disabled
2 letter F: First detect mode: the first active video input is selected.
nd
P: Priority detect: always the highest priority active video
input will be selected.
L: Last detect: always the last attached input is switched to
the output automatically.
The Autoselect Feature section.
MMX8x4-HT series – User's Manual
8.7.15. Change the Autoselect Mode
Command and
ç CALL·/MEDIA/VIDEO/XP:setDestinationPortAutoselect(<out>:<out_set>)
æ mO·/MEDIA/VIDEO/XP:setDestinationPortAutoselect
Parameters
See the previous section.
Example
ç CALL /MEDIA/VIDEO/XP:setDestinationPortAutoselect(O1:EF)
æ mO /MEDIA/VIDEO/XP:setDestinationPortAutoselect
The Autoselect mode is Enabled on Output 1 in First detect mode.
INFO:

output.
8.7.16. Query the Input Port Priority
Command and Response
ç GET·/MEDIA/VIDEO/XP.PortPriorityList
pr·/MEDIA/VIDEO/XP.PortPrioirtyList=<out1_list>;<out2_list>;<...>;<out#_list>
æ
The response shows the priority of each output one after another. The priority number can be from 0 to 31; 0 is the
highest- and 30 is the lowest priority. 31 means that the port will be skipped from the priority list.
Parameters
<out_list>
Example
ç GET /MEDIA/VIDEO/XP.PortPriorityList
æ pr /MEDIA/VIDEO/XP.PortPriorityList=7,6,5,4,3,2,1,0;0,1,2,3,4,5,6,7;0,1,2,3,4,5,6,7;0,1,2,3,4,5,6,7;0,1,2,3,4,5,6,7
There are five outputs, so five groups are listed in the response (divided by semicolons) and each group (list)
contains eight priority numbers. The values show the priority order of the video input ports:
I1 I2
7 6
I1 I2
0 1
Input 8 has the highest priority, Input 7 has the lowest priority on O1. On O2 O3, O4 and O5 ports the setting is the
opposite.
ATTENTION!

match, the input port with the lowest port number will have the highest priority.

INFO:
Applied firmware package: v1.3.0 | LDC software: v2.4.2
Response #autoselect
Output 5 in MMX8x4-HT400MC and MMX8x4-HT420M models means the advanced analog audio
The input port priority order of the given output port: <in1>,<in2>,<...>,<in>
Output 1 Output 2
I3 I4 I5 I6 I7 I8 I1 I2 I3 I4 I5 I6
5 4 3 2 1 0 0 1 2 3 4 5
Output 3 Output 5
I3 I4 I5 I6 I7 I8 I1 I2 I3 I4 I5 I6
2 3 4 5 6 7 0 1 2 3 4 5
The same priority number can be set to different input ports. When the priority numbers
Output 5 in MMX8x4-HT400MC and -HT420M models means the advanced analog audio output.
114
Output 3
I7 I8 I1 I2 I3 I4 I5 I6 I7 I8
6 7 0 1 2 3 4 5 6 7
I7 I8
6 7