Lightware MMX8x4-HT420M User Manual page 159

   
8. LW3 Programmers' Reference
Set the Volume by Step Value - Volume down
ç CALL·/MEDIA/AUDIO/I9:volumeDown()
Set the Panorama on the Microphone Input
SET·/MEDIA/AUDIO/I9.Panorama=<pan_set>
ç
Query the Gain on the Microphone Input
ç GET·/MEDIA/AUDIO/I9.InputGain
Set the Gain n the Microphone Input
SET·/MEDIA/AUDIO/I9.InputGain=<gain_value>
ç
Switch on the Phantom Power
SET·/MEDIA/AUDIO/I9.PhantomPower=<phantom_status>
ç
Set the Phase Inverter on Microphone Input
SET·/MEDIA/AUDIO/I9.InvertPhase=<invertphase_status>
ç
Set the Feedback on Microphone Input
SET·/MEDIA/AUDIO/I9.FeedbackCancel=<feedback_status>
ç
Set the Highpass Filter on Microphone Input
SET·/MEDIA/AUDIO/I9.HPF=<hpf_status>
ç
Set the Lowpass Filter on Microphone Input
SET·/MEDIA/AUDIO/I9.LPF=<lpf_status>
ç
Equalizer (EQ) Settings on Microphone Input
SET·/MEDIA/AUDIO/I9.<eq_nr>Gain=<gain_value>
ç
Load Factory Mic Preset
SET·/MEDIA/AUDIO/I9.MicPreset=<preset_nr>
ç
Advanced Analog Audio Input
Mute the Advanced Analog In
SET·/MEDIA/AUDIO/I10.Mute=<mute_status>
ç
Set the Volume with Exact Value on Advanced Analog In
SET·/MEDIA/AUDIO/I10.Volume=<volume_dB>
ç
Set the Volume by Step Value - Volume up
ç CALL·/MEDIA/AUDIO/I10:volumeUp()
Set the Volume by Step Value - Volume down
ç CALL·/MEDIA/AUDIO/I10:volumeDown()
MMX8x4-HT series – User's Manual
Set the Balance on the Advanced Analog In
ç
Query the Gain on the Advanced Analog In
ç GET·/MEDIA/AUDIO/I10.InputGain
Set the Gain on the Advanced Analog In
ç
Set the Phase Invert on Advanced Analog In
ç
Set the Highpass Filter on Advanced Analog In
ç
Set the Lowpass Filter on Advanced Analog In
ç
Equalizer (EQ) Settings on Advanced Analog In
ç
Embedded Audio Input Settings
Set the Audio Channel
ç
Query the Sampling Frequency
ç GET·/MEDIA/AUDIO/<in>.SamplingFreq
Mute the Emb. Audio In
ç
Set the Volume with Exact Value on the Emb. Audio In
ç
Set the Volume by Step Value - Volume up
ç CALL·/MEDIA/AUDIO/I11:volumeUp()
Set the Volume by Step Value - Volume down
ç CALL·/MEDIA/AUDIO/I11:volumeDown()
Set the Balance on the Emb. Audio In
ç
Set the Phase Invert on the Emb. Audio In
ç
Applied firmware package: v1.3.0 | LDC software: v2.4.2
SET·/MEDIA/AUDIO/I10.Balance=<bal_set>
SET·/MEDIA/AUDIO/I10.InputGain=<gain_value>
SET·/MEDIA/AUDIO/I10.InvertPhase=<invertphase_status>
SET·/MEDIA/AUDIO/I10.HPF=<hpf_status>
SET·/MEDIA/AUDIO/I10.LPF=<lpf_status>
SET·/MEDIA/AUDIO/I10.<eq_nr>Gain=<gain_value>
SET·/MEDIA/AUDIO/I11.AudioSource=<in><a_v>
SET·/MEDIA/AUDIO/I11.Mute=<mute_status>
SET·/MEDIA/AUDIO/I11.Volume=<volume_dB>
SET·/MEDIA/AUDIO/I11.Balance=<bal_set>
SET·/MEDIA/AUDIO/I11.InvertPhase=<invertphase_status>
159