Lightware MMX8x4-HT420M User Manual page 3

   
Symbol Legend
The following symbols and markings are used in the document:

WARNING! Safety-related information
recommended to read and keep in every case!

ATTENTION! Useful information to perform a successful procedure;
it is recommended to read.

DIFFERENCE: Feature or function that is available with a specific
firmware/hardware version or product variant.
INFO:
A notice which may contain additional information. Procedure
can be successful without reading it.
DEFINITION:
The short description of a feature or a function.

TIPS AND TRICKS: Ideas which you may have not known yet but
can be useful.
Navigation Buttons
Go back to the previous page. If you clicked on a link previously,

you can go back to the source page by pressing the button.

Navigate to the Table of Contents.

Step back one page.

Step forward to the next page.
Document Information
All presented functions refer to the indicated products. The
descriptions have been made during testing these functions in
which is highly
accordance
environment:
Lightware Device Controller (LDC) software
Lightware Device Updater2 Software
Firmware package
Hardware
Document revision: v1.7
Release date: 19-11-2020
Editor: Laszlo Zsedenyi
Applied firmware package: v1.3.0 | LDC software: v2.4.2
MMX8x4-HT series – User's Manual
with the indicated Hardware/Firmware/Software
Item Version
2.4.2
2.6.0
1.3.0
1.2
About Printing
Lightware Visual Engineering supports green technologies and
eco-friend mentality. Thus, this document is made for digital usage
primarily. If you need to print out few pages for any reason, follow the
recommended printing settings:
Page size: A4
▪
▪ Output size: Fit to page or Match page size
▪ Orientation: Landscape

TIPS AND TRICKS: Thanks to the size of the original page, the
border around the content (grey on the second picture below)
makes possible to organize the pages better. After punching the
printed pages, they can be placed easily into a ring folder.
1 2
Hashtag (#) Keywords in the Document
This user's manual contains keywords with hashtag (#) to help you to
find the relevant information as quick as possible.
The format of the keywords is the following:
#<keyword>
The usage of the keywords: use the Search function (Ctrl+F / Cmd+F)
of your PDF reader application, type the #(hashtag) character and the
wished keyword.
The #new special keyword indicates a new feature/function that has
just appeared in the latest firmware or software version.
Example
#dhcp
This keyword is placed at the DHCP setting command in the LW3
Programmer's reference section.
3
3