Switching And Crosspoint Settings; Query The Video Crosspoint State; Switching An Input To An Output; Switching An Input To All Outputs - Lightware MMX8x4-HT420M User Manual

   
8. LW3 Programmers' Reference
8.6. Switching and Crosspoint Settings
8.6.1. Query the Video Crosspoint State
Command and Response
ç GET·/MEDIA/VIDEO/XP.DestinationConnectionList
pr·/MEDIA/VIDEO/XP.DestinationConnectionList=<out1_state>;<out2_state>;<...>;<o5_state>
æ
Example
ç GET /MEDIA/VIDEO/XP.DestinationConnectionList
æ pr /MEDIA/VIDEO/XP.DestinationConnectionList=I1;I1;I8;I8;I1
I1 port is connected to O1,O2 and O5, I8 is connected to O3 and O4.
INFO:
The response depends on the number of the output ports. MMX8x4-HT400MC and MMX8x4-HT420M
models have 4 output ports, MMX8x8-HDMI-4K-A model has 8 output ports.
8.6.2. Switching an Input to an Output
Command and Response #crosspoint #switch
ç CALL·/MEDIA/VIDEO/XP:switch(<in>:<out>)
æ mO·/MEDIA/VIDEO/XP:switch
Example 1
ç CALL /MEDIA/VIDEO/XP:switch(I2:O1)
æ mO /MEDIA/VIDEO/XP:switch
Example 2
ç CALL /MEDIA/VIDEO/XP:switch(0:O1)
æ mO /MEDIA/VIDEO/XP:switch
When using 0 (zero) value as an input, the input will be disconnected and no signal will appear on the output.
8.6.3. Switching an Input to All Outputs
Command and Response
ç CALL·/MEDIA/VIDEO/XP:switchAll(<in>)
æ mO·/MEDIA/VIDEO/XP:switchAll
Example
ç CALL /MEDIA/VIDEO/XP:switchAll(I1)
æ m0 /MEDIA/VIDEO/XP:switchAll

TIPS AND TRICKS: All output ports can be disconnected by the '0' value:
CALL /MEDIA/VIDEO/XP:switchAll(0).
MMX8x4-HT series – User's Manual
8.7. Video Port Settings
8.7.1. Mute an Input Port
Command and
ç CALL·/MEDIA/VIDEO/XP:muteSource(<in>)
æ mO·/MEDIA/VIDEO/XP:muteSource
Example
ç CALL /MEDIA/VIDEO/XP:muteSource(I2)
æ mO /MEDIA/VIDEO/XP:muteSource
8.7.2. Unmute an Input Port
Command and Response
ç CALL·/MEDIA/VIDEO/XP:unmuteSource(<in>)
æ mO·/MEDIA/VIDEO/XP:unmuteSource
Example
ç CALL /MEDIA/VIDEO/XP:unmuteSource(I2)
æ mO /MEDIA/VIDEO/XP:unmuteSource
8.7.3. Mute an Output Port
Command and Response
ç CALL·/MEDIA/VIDEO/XP:muteDestination(<out>)
æ mO·/MEDIA/VIDEO/XP:muteDestination
Example
ç CALL /MEDIA/VIDEO/XP:muteDestination(O1)
æ mO /MEDIA/VIDEO/XP:muteDestination
8.7.4. Unmute an Output Port
Command and Response
ç CALL·/MEDIA/VIDEO/XP:unmuteDestination(<out>)
æ mO·/MEDIA/VIDEO/XP:unmuteDestination
Example
ç CALL /MEDIA/VIDEO/XP:unmuteDestination(O1)
æ mO /MEDIA/VIDEO/XP:unmuteDestination
Applied firmware package: v1.3.0 | LDC software: v2.4.2
Response #mute
#unmute
111