Lightware MMX8x4-HT420M User Manual page 158

   
8. LW3 Programmers' Reference
HDCP Setting (Output Port)
SET·/MEDIA/VIDEO/<On>.HdcpModeSetting=<hdcp_mode>
ç
Querying the Connected Input Port Number
ç GET·/MEDIA/VIDEO/<out>.ConnectedSource
Query the Status of Source Port
ç GET·/MEDIA/VIDEO/XP.SourcePortStatus
Query the Status of Destination Port
ç GET·/MEDIA/XP/VIDEO.DestinationPortStatus
Query the Video Autoselect Settings
ç GET·/MEDIA/VIDEO/XP.DestinationPortAutoselect
Change the Autoselect Mode
ç CALL·/MEDIA/VIDEO/XP:setDestinationPortAutoselect(<out>:<out_set>)
Query the Input Port Priority
ç GET·/MEDIA/VIDEO/XP.PortPriorityList
Changing the Input Port Priority
ç CALL·/MEDIA/VIDEO/XP:setAutoselectionPriority(<in>\(<out>\):<prio>);(<in>\(<out>\):<prio>)
PoE Enable
SET·/REMOTE/<tps_port>.PoeEnabled=<poe_status>
ç
TPS Mode Settings on TPS Ports
SET·/REMOTE/<tps_port>.tpsModeSetting=<tps_mode_setting>
ç
Signal Type Settings (Output Ports)
SET·/MEDIA/VIDEO/<out>.HdmiModeSetting=<signal_type>
ç
Test Pattern
Test pattern generator mode setting
SET·/MEDIA/VIDEO/<out>.TpgMode=<tpg_mode>
ç
Clock source – the clock frequency of the test pattern
SET·/MEDIA/VIDEO/<out>.TpgClockSource=<tpg_clocksource>
ç
Test pattern
SET·/MEDIA/VIDEO/<out>.TpgPattern=<pattern>
ç
MMX8x4-HT series – User's Manual
EDID Management
Query the Emulated EDIDs
Set the Emulated EDID
Copy an EDID into Another Slot
AUX Analog Audio I/O Port Settings
Audio Mode Setting
AUX Analog Audio Input Mute Setting
AUX Analog Audio Input Volume Setting
AUX Analog Audio Input Balance Setting
AUX Analog Audio Input Gain Setting
AUX Analog Audio Output Mute Settings
AUX Analog Audio Output Volume Setting
AUX Analog Audio Output Balance Setting
Advanced Audio Settings
Microphone Input Settings
Mute on Microphone Input
Set the Volume with Exact Value on Microphone Input
Set the Volume by Step Value - Volume up
Applied firmware package: v1.3.0 | LDC software: v2.4.2
ç GET·/EDID.EdidStatus
ç CALL·/EDID:switch(<source>:<destination>)
ç CALL·/EDID:copy(<source>:<destination>)
SET·/MEDIA/AUDIO/<in>.AudioMode=<audio_mode>
ç
SET·/MEDIA/AUDIO/<in>/ADCVOLUME.Mute=<mute_status>
ç
SET·/MEDIA/AUDIO/<in>/ADCVOLUME.VolumedB=<volume_dB>
ç
SET·/MEDIA/AUDIO/<in>/ADCVOLUME.Balance=<balance_value>
ç
SET·/MEDIA/AUDIO/<in>/ADCVOLUME.Gain=<gain_dB>
ç
SET·/MEDIA/AUDIO/<in>.DACVOLUME.Mute=<mute_status>
ç
SET·/MEDIA/AUDIO/<in>/DACVOLUME.VolumedB=<volume_dB>
ç
SET·/MEDIA/AUDIO/<in>/DACVOLUME.Balance=<balance_value>
ç
SET·/MEDIA/AUDIO/I9.Mute=<mute_status>
ç
SET·/MEDIA/AUDIO/I9.Volume=<volume_dB>
ç
ç CALL·/MEDIA/AUDIO/I9:volumeUp()
158