Lightware MMX8x4-HT420M User Manual page 125

   
8. LW3 Programmers' Reference
8.10.3.7. Set the Balance on the Emb. Audio In
Command and Response #balance
SET·/MEDIA/AUDIO/I11.Balance=<bal_set>
ç
pw·/MEDIA/AUDIO/I11.Balance=<bal_set>
æ
Parameters
Identifier Parameter description
<bal_set> Balance setting
Example
ç SET /MEDIA/AUDIO/I11.Balance=L6
æ pw /MEDIA/AUDIO/I11.Balance=L6
Audio sound will be transmitted to the left channel of the audio output.

INFO: L1 and R1 are near the center, L6 means the maximum left side, R6 means the maximum right side.
8.10.3.8. Set the Phase Invert on the Emb. Audio In
Command and Response
SET·/MEDIA/AUDIO/I11.InvertPhase=<invertphase_status>
ç
pw·/MEDIA/AUDIO/I11.InvertPhase=<invertphase_status>
æ
Parameters
If the <invertphase_status> parameter is true, the invert phase is on, if it is false the invert phase is off.
Example
ç SET /MEDIA/AUDIO/I11.InvertPhase=true
æ pw /MEDIA/AUDIO/I11.InvertPhase=true
For more details about the Phase Invert feature see
Parameter values
R1-R6: Right channel, value can be set between 1 and 6.
L1-L6: Left channel, value can be set between 1 and 6.
0: Center
Legend of Embedded or Advanced Input Channel
MMX8x4-HT series – User's Manual
8.10.3.9. Set the Duck on the Emb. Audio In
Command and Response
SET·/MEDIA/AUDIO/I11.Ducker=<duck_status>
ç
pw·/MEDIA/AUDIO/I11.Ducker=<duck_status>
æ
Parameters
If the <duck_status>
Example
ç SET /MEDIA/AUDIO/I11.Ducker=true
æ pw /MEDIA/AUDIO/I11.Ducker=true
See more details about the Duck function in the
8.10.3.10. Set the Highpass Filter on the Emb. Audio In
Command and Response
SET·/MEDIA/AUDIO/I11.HPF=<hpf_status>
ç
pw·/MEDIA/AUDIO/I11.HPF=<hpf_status>
æ
Parameters
If the <hpf_status>
Example
ç SET /MEDIA/AUDIO/I11.HPF=true
æ pw /MEDIA/AUDIO/I11.HPF=true
See more details about the Highpass Filter in the
8.10.3.11. Set the Lowpass Filter on the Emb. Audio In
Command and Response
SET·/MEDIA/AUDIO/I11.LPF=<lpf_status>
ç
section.
pw·/MEDIA/AUDIO/I11.LPF=<lpf_status>
æ
Parameters
If the <lpf_status>
Example
ç SET /MEDIA/AUDIO/I11.LPF=true
æ pw /MEDIA/AUDIO/I11.LPF=true
See more details about the Lowpass Filter in the
Applied firmware package: v1.3.0 | LDC software: v2.4.2
paramtere is true, the duck function is on, if it is false the Duck function is off.
Legend of Embedded or Advanced Input Channel
parameter is true, the highpass filter is on, if it is false the highpass filter is off.
Embedded or Analog Input Channel
parameter is true, the lowpass filter is on, if it is false, the lowpass filter is off.
Embedded or Analog Input Channel
125
section.
section.
section