Settings Menu; Status; Network - Lightware MMX8x4-HT420M User Manual

   
6. Software Control – Lightware Device Controller
6.13. Settings Menu
6.13.1. Status
General information is shown on this tab, such as device label, part number, serial number and hardware
health, voltage and temperature values.
The most important hardware and software related information can be found on this tab: hardware and
firmware version, serial numbers, temperatures, operation time, and voltage information. Device label can
be changed to unique description by the Set button.
Please note that the Miniweb-related descriptions can be found in the
Clicking on the Identify me button results the blinking of the status and crosspoint LEDs in green for 10 seconds.
The feature helps to identify the device itself in the rack shelf.
#devicelabel #label #producttype
Status tab in Settings menu
The Built-in Miniweb
#firmwareversion #identifyme #status # serialnumber
Applied firmware package: v1.3.0 | LDC software: v2.4.2
MMX8x4-HT series – User's Manual
6.13.2. Network
Network-related settings are available on the tab.
General
IP address and DHCP settings can be set on this tab. Always press the Apply settings button to save changes.
Factory defaults settings can be recalled with a dedicated button.
TCP/IP Ports and Services
section.
The IP Port Block feature is an additional protection for the Cleartext login, see the
There are TCP/IP ports in Lightware devices which are not protected by the login, so you can disable them
if necessary. For example, due to the working method of the LW2 communication, the Cleartext login does
not provide protection when LW2 command is sent to the device, that is why the TCP port no.10001 shall be
blocked manually.
Network tab in Settings menu
#dhcp #ipaddress #network #portblock
88
Basic IT Security section.