Rear View - Lightware MX2-4x4-HDMI20-CA User Manual


  
2. Product Overview
2.2. Rear View
MX2-24x24-DH-24DPio-A-R
1 2
A A VIS: RISQUE DE CHOC VIS: RISQUE DE CHOC
ELECTRIQUE NE ELECTRIQUE NE
PAS OUVRIR PAS OUVRIR
Sn: Sn:
Made in EU, Hungary Made in EU, Hungary
SERVICE SERVICE
ON
ON
OFF OFF
ON ON
OFF OFF
7 6 5
MX2-HDMI20 series – User's Manual
3
4
Applied firmware package: v1.7.0 | LDC software: v2.5.1b5
1 RS-232 Port ▪ -R suffixed models: 9-pole D-SUB connector.
Other models: 3-pole Phoenix connector.
▪
2 LAN Port ▪ -R suffixed models: Neutrik etherCON connector for Ethernet/LAN connection.
▪ Other models: RJ45 connector to control the matrix via LAN/Ethernet.
Input Ports HDMI input ports are able to receive HDMI 2.0 video signal. -H in the model name
3
indicates, that the matrix has a HDMI connector.
-D in the model name refers that the matrix has a DisplayPort input connector for
accepting DP1.2 video signal.
Audio input ports (5-pole Phoenix) for balanced analog audio input signal (in -A
suffixed models).
See the details about the difference in the models in the
Output Ports HDMI or DP output ports for connecting sink devices.
4
Audio output ports (5-pole Phoenix) for balanced analog audio output signal. The
signal is de-embedded from the given video port (in -A suffixed models).
Power Switch The matrix can be switched on/off by the power switch.
5 ▪
▪ The 1U-high matrix switchers are not supplied with a power switch.
AC Connector -R suffixed models: two Neutrik powerCON connector accepting 100-240 V, 50
6 ▪
or 60 Hz. For more details about the redundant supply see
Operations section.
In the other models: Standard IEC connector accepting 100-240 V, 50 or 60 Hz.
▪
7 Service Button Hidden button for special operations.
17
Model Comparison table.
Front Panel Buttons