Rear View - Lightware MX2-8x8-DH-4DPio-A User Manual

   
2. Product Overview
2.2. Rear View
MX2-24x24-DH-24DPio-A-R
1 2
7 6 5
MX2 Standalone Matrix Switcher series – User's Manual
3
4
Applied firmware package: v1.9.0 | LDC software: v2.6.2b3
1 RS-232 Port ▪ -R suffixed models: 9-pole D-SUB connector.
▪ Other models: 3-pole Phoenix connector.
LAN Port ▪ -R suffixed models: Neutrik etherCON connector for Ethernet/LAN connection.
2
▪ Other models: RJ45 connector to control the matrix via LAN/Ethernet.
Input Ports HDMI input ports are able to receive HDMI 2.0 video signal. -H in the model name
3
indicates that the matrix has a HDMI connector.
-D in the model name means that the matrix has a DisplayPort input connector for
accepting DP1.2 video signal.
Audio input ports (5-pole Phoenix) for balanced analog audio input signal (in -A and
-Audio suffixed models).
See the details about the difference in the models in the
4 Output Ports HDMI or DP output ports for connecting sink devices.
Audio output ports (5-pole Phoenix) for balanced analog audio output signal. The
signal is de-embedded from the given video port (in -A suffixed models).
5 Power Switch ▪ The matrix can be switched on/off by the power switch.
▪ The 1U-high matrix switchers are not supplied with a power switch.
6 AC Connector ▪ -R suffixed models: two Neutrik powerCON connector accepting 100-240 V, 50
or 60 Hz. For more details about the redundant supply, see the
Buttons Operations section.
▪ In the other models: Standard IEC connector accepting 100-240 V, 50 or 60 Hz.
7 Service Button Hidden button for special operations.
18
Model Comparison table.
Front Panel