Rear View - Lightware MX2-8x8-HDMI20-L User Manual


  
3. Product Overview
3.3. Rear View
MX2-24x24-DH-12DPi-A-R
1 2
A VIS: RISQUE DE CHOC
ELECTRIQUE NE
PAS OUVRIR
Sn:
Made in EU, Hungary
SERVICE
ON
OFF
ON
OFF
7 6 5
3
4
MX2-HDMI20 series – User's Manual
RS-232 Port
1 ▪
▪
2 LAN Port ▪
▪
3 Input Ports HDMI input ports are able to receive HDMI 2.0 video signal.
-D in the model name refers that the matrix has a DisplayPort input connector for
accepting DP1.2 video signal. See the details about the difference in the models
in the
Audio input ports (5-pole Phoenix) for balanced analog audio input signal (in -A
suffixed models).
4 Output Ports HDMI output ports for connecting sink devices.
Audio output ports (5-pole Phoenix) for balanced analog audio output signal. The
signal is de-embedded from the given HDMI port (in -A suffixed models).
5 Power Switch ▪
▪
6 AC Connector ▪
▪
Service Button Hidden button for special operations.
7
-R suffixed models: 9-pole D-SUB connector.
Other models: 3-pole Phoenix connector.
-R suffixed models: Neutrik etherCON connector for Ethernet/LAN connection.
Other models: RJ45 connector to control the matrix via LAN/Ethernet.
Model Comparison table.
The matrix can be switched on/off by the power switch.
The 1U-high matrix switchers are not supplied with a power switch.
-R suffixed models: two Neutrik powerCON connector accepting 100-240 V,
50 or 60 Hz. For more details about the redundant supply see
section.
In the other models: Standard IEC connector accepting 100-240 V, 50 or 60 Hz.
15
Powering On