6. Software Control – Lightware Device Controller
MAC Filter Allowlist
Another level of the security is the MAC Filtering tool. You can create a list of network devices based on the
MAC address which are
allowed:
▪
Controlling the device (Send option), or
Querying parameters (Receive option) to/from the Lightware device.
▪
Do not forget to press the Apply changes button to store the new settings.
ATTENTION!
The first three lines (as seen in the picture) are factory default values and they are necessary
for the proper working.
6.13.3. Backup
Details about this function can be found in the
6.13.4. System
Cleartext Login (Login Settings)
This cleartext login tool allows setting a password for login, thus, the device will not accept any command
coming from a control interface (RS-232, Ethernet, etc...) without login. The device will be visible in the Device
Discovery window (as the device type and the serial number can be queried without login) but connection
can be established only after successful login. The login is valid until a TCP socket break in case of Ethernet
connection.
#login
INFO:
The login password is erased and the login is disabled when restoring the factory default values.
Further functions
Download system log - saving the file of the device.
▪
Load factory defaults - recalling factory defaults settings and values. All factory default settings are
▪
listed in the
Factory Default Settings
Reboot - rebooting the
system. #factory
▪
#macfilter
Configuration Cloning (Backup
Tab)section.
section.
#log
#systemlog
#reboot #restar
Applied firmware package: v1.3.0 | LDC software: v2.4.2
MMX8x4-HT series – User's Manual
System tab in the Settings menu
89