Rear View (Mx8X8Dvi-Hdcp-Pro); Rear View (Mx8X8Hdmi-Hdcp-Pro) - Lightware MX32x32HDMI-Pro User Manual

2.1.2.
AC Power RS-232
connector port
Fuse Ethernet port

2.1.3. Rear view (MX8x8HDMI-HDCP-Pro)

AC Power RS-232
connector port
Fuse Ethernet
port
AC Power
AC Fuse
RS-232/422 connector 9-pole D-sub female connector. Can be ordered with RS-
Ethernet port
DVI-D inputs
DVI-D outputs
HDMI inputs
HDMI outputs
S/PDIF outputs
Input status LEDs
Card activity LEDs

Rear view (MX8x8DVI-HDCP-Pro)

HDMI Inputs
HDMI Outputs
Standard IEC power connector. The router works with
100 to 240 Volts, 50 or 60 Hz power sources.
Replace with F 3.15A type only.
232 or RS-422 control.
Standard RJ45 connector. This port can be connected to
Local Area Network.
Standard 29-pole DVI connectors for input connections. It
accepts only digital signals.
Standard 29-pole DVI connectors for outputs.
19-pole type A HDMI connectors for input connections.
19-pole type A HDMI connectors for output connections.
RCA jack connector with S/PDIF digital audio signal.
Embedded audio is still present on HDMI outputs.
Four LEDs help the signal monitoring on each HDMI
input port. They indicate the presence of power +5V, the
presence of an active video signal, HDMI mode and the
HDCP encryption status.
These LEDs are blinking when the cards are active.
MX32x32DVI-HDCP-Pro and HDMI-Pro
DVI-D Inputs
1-8
DVI-D Outputs
1-8
Input status LEDs
S/PDIF Outputs
User's Manual v1.0
Card activity
LEDs
Card activity
LEDs
Page 9/ 109