Lock An Input Port; Unlock An Input Port; Lock An Output Port; Unlock An Output Port - Lightware MMX8x4-HT420M User Manual

   
8. LW3 Programmers' Reference
8.7.5. Lock an Input Port
Command and Response #lock
ç CALL·/MEDIA/VIDEO/XP:lockSource(<in>)
æ mO·/MEDIA/VIDEO/XP:lockSource
Example
ç CALL /MEDIA/VIDEO/XP:lockSource(I1)
æ mO /MEDIA/VIDEO/XP:lockSource
8.7.6. Unlock an Input Port
Command and Response #unlock
ç CALL·/MEDIA/VIDEO/XP:unlockSource(<in>)
æ mO·/MEDIA/VIDEO/XP:unlockSource
Example
ç CALL /MEDIA/VIDEO/XP:unlockSource(I1)
æ mO /MEDIA/VIDEO/XP:unlockSource
8.7.7. Lock an Output Port
Command and Response
ç CALL·/MEDIA/VIDEO/XP:lockDestination(<out>)
æ mO·/MEDIA/VIDEO/XP:lockDestination
Example
ç CALL /MEDIA/VIDEO/XP:lockDestination(O1)
æ mO /MEDIA/VIDEO/XP:lockDestination
8.7.8. Unlock an Output Port
Command and Response
ç CALL·/MEDIA/VIDEO/XP:unlockDestination(<out>)
æ mO·/MEDIA/VIDEO/XP:unlockDestination
Example
ç CALL /MEDIA/VIDEO/XP:unlockDestination(O1)
æ mO /MEDIA/VIDEO/XP:unlockDestination
MMX8x4-HT series – User's Manual
8.7.9. HDCP Setting (Input Port)
HDCP capability can be enabled/disabled on the input ports, thus, non-encrypted content can be seen on a
non-HDCP compliant display. See more information in
Command and Response
SET·/MEDIA/VIDEO/<In>.HdcpEnable=<hdcp_status>
ç
pw·/MEDIA/VIDEO/<In>.HdcpEnable=<hdcp_status>
æ
Parameters
<hdcp_status>
Example
ç SET /MEDIA/VIDEO/I1.HdcpEnable=false
æ pw /MEDIA/VIDEO/I1.HdcpEnable=false
8.7.10. HDCP Setting (Output Port)
HDCP capability can be set to Auto/Always on the output ports, thus, non-encrypted content can be
transmitted to a non-HDCP compliant display. See more information in
Command and Response
SET·/MEDIA/VIDEO/<On>.HdcpModeSetting=<hdcp_mode>
ç
pw·/MEDIA/VIDEO/<On>.HdcpModeSetting=<hdcp_mode>
æ
Parameters
<hdcp_mode>
Example
ç SET /MEDIA/VIDEO/O1.HdcpModeSetting=0
æ pw /MEDIA/VIDEO/O1.HdcpModeSetting=0
8.7.11. Querying the Connected Input Port Number

DIFFERENCE:
The response of this command shows the input port that is connected to the queried output port.
Command and Response
ç GET·/MEDIA/VIDEO/<out>.ConnectedSource
pr·/MEDIA/VIDEO/<out>.ConnectedSource=<in>
æ
Example
ç GET /MEDIA/VIDEO/O1.ConnectedSource
æ pr /MEDIA/VIDEO/O1.ConnectedSource=I1
Applied firmware package: v1.3.0 | LDC software: v2.4.2
HDCP Management
#hdcp
true: HDCP enabled
false: HDCP disabled
0: Auto
1: Always
This command is available from firmware v1.3.0.
#crosspoint
112
section.
HDCP Management section.