Lightware MMX8x4-HT420M User Manual page 162

   
8. LW3 Programmers' Reference
Setting the TCP/IP Port Number of the TCP Server
ç SET·/CTRL/TCP/C<loc>.ServerPort(<port_no>)
Connecting to a TCP Server
ç CALL·/CTRL/TCP/C<loc>:connect()
Disconnecting from a TCP Server
ç CALL·/CTRL/TCP/C<loc>:disconnect()
Setting the Delimiter Hex
SET·/CTRL/TCP/C<loc>.DelimiterHex=<delimiter>
ç
Setting the Timeout
SET·/CTRL/TCP/C<loc>.TimeOut=<timeout>
ç
Querying the Last Recognized Message (String)
ç GET·/CTRL/TCP/C<loc>.Rx
Querying the Last Recognized Message (Hex)
ç GET·/CTRL/TCP/C<loc>.RxHex
Clearing the Last Recognized Stored Message
ç CALL·/CTRL/TCP/C<loc>:clear()
Querying the Last Recognized Active Message (String)
ç GET·/CTRL/TCP/C<loc>.ActiveRx
Querying the Last Recognized Active Message (Hex)
ç GET·/CTRL/TCP/C<loc>.ActiveRxHex
Set the Active Timeout
SET·/CTRL/TCP/C<loc>.ActivePropertyTimeout=<a_timeout>
ç
Running an Immediate Event Action
SET·/CTRL/TCP/C<loc>.ActionTrigger=<event_nr>
ç
HTTP Messaging
Setting the Target IP Address
SET·/CTRL/HTTP/C1.ServerIP=<IP_address>
ç
Setting the TCP Port
SET·/CTRL/HTTP/C1.ServerPort=<port_no>
ç
Setting the Target Path
SET·/CTRL/HTTP/C1.File=<path>
ç
MMX8x4-HT series – User's Manual
Setting the Message Header
SET·/CTRL/HTTP/C1.Header=<header_text>
ç
Sending a Post Message
ç CALL·/CTRL/HTTP/C1:post(<body_text>)
Sending a Put Message
ç CALL·/CTRL/HTTP/C1:put(<body_text>)
CEC Command Sending
Press&Release Commands
ç CALL·/MEDIA/CEC/<port>:sendClick(<command>)
Further Commands
ç CALL·/MEDIA/CEC/<port>:send(<command>)
Sending an OSD String
SET·/MEDIA/CEC/<port>.OsdString=<text>
ç
ç CALL·/MEDIA/CEC/<port>:send(set_osd)
Sending CEC Commands in Hex Format
ç CALL·/MEDIA/CEC/<port>:sendHex(<hex_code>)
Querying the Last Received CEC Message
ç GET /MEDIA/CEC/<port>.LastReceivedMessage
Event Manager Basics
Setting a Condition by Specifying a Direct Path
SET·/EVENTS/E<loc>.Condition=<expression>
ç
Setting a Condition by Linking Another Condition
SET·/EVENTS/E<loc>.Condition=<event_nr>
ç
Setting a Condition by Linking Two Conditions
SET·/EVENTS/E<loc>.Condition=<event_nr>&<event_nr>
ç
Setting an Action by Specifying a Direct Path
SET·/EVENTS/E<loc>.Action=<expression>
ç
Setting an Action by Linking Another Action
SET·/EVENTS/E<loc>.Action=<event_nr>
ç
Setting an Action by Linking a Macro
SET·/EVENTS/E<loc>.Action=<macro_name>
ç
Applied firmware package: v1.3.0 | LDC software: v2.4.2
162