Device Discovery Window - Lightware MMX8x4-HT420M User Manual

Multiport matrix switcher
Hide thumbs Also See for MMX8x4-HT420M:
Table of Contents

Advertisement

 
6. Software Control – Lightware Device Controller
6.3. Device Discovery Window
There are three tabs for the different type of interfaces, select the Ethernet, Serial devices or USB tab.
Establishing the Connection
Select the unit from the discovered Ethernet devices; double click on the device or select it and click on the
green Connect button.

Device Discovery Window

Applied firmware package: v1.3.0 | LDC software: v2.4.2
MMX8x4-HT series – User's Manual
Identifying the Device
Clicking on the icon results a Device identified! message on the LCD screen. The
feature helps to identify the device itself in the rack shelf
The Ethernet tab consists of two lists:
Favorite Devices: You can add any Lightware device that is connected via Ethernet and no need to
browse all the available devices. Devices can be added by pressing the Add button or marking the
desired device by the
All Devices: The Lightware devices are listed which are available in the connected network.
Further Tools
The Tools menu contains the following options:
Log Viewer: The tool can be used for reviewing log files which have been saved previously.
Create EDID: This tool opens the Easy EDID Creator wizard which can be used for creating unique EDIDs
in a few simple steps. Functionality is the same as the Easy EDID Creator, for the detailed information
see
Creating an EDID
Demo Mode: This is a virtual MX-FR17 matrix router with full functionality built into the LDC. Functions
and options are the same as a real MX-FR17 device.
The Terminal window is also available by pressing its button on the bottom.
IP Address Configuration
The IP settings of a device can be changed without establishing
the connection to the LDC. If the feature is supported by the
device an icon is displayed next to the IP address:
Press the icon to open the IP configuration window and set the
necessary parameters then press the Apply button (or Cancel to
discard and exit).
#dhcp  ipaddress
symbol in the All Devices list.
section.
56

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mmx8x4-ht400mcMmx8x8-hdmi-4k-aMmx8x8-hdmi-4k-a-usb20

Table of Contents