Content Of The Backup File - Lightware MMX8x4-HT420M User Manual

   
12. Appendix
USB Settings
Parameter
Selected USB Host (USB-B port)
5V Enabled on USB Device (USB-A ports 1-4) Enable
In MMX8x8-HDMI-4K-A-USB20 model.
5
12.6. Content of the Backup File
5
Setting/Value The backup file contains numerous settings and parameters saved
from the device. When the file is uploaded to a device, the followings
PC1
will be overwritten:
Network settings
DHCP status (enable / disable)
▪
▪ Static IP address, Network mask, Gateway address
▪ MAC filter allowlist, Port blocking settings
TCP client settings (/CTRL/TCP)
▪
Video ports settings
▪ Port name
Port status (Lock/Unlock/Mute/Unmute, Autoselect settings)
▪
▪ Crosspoint state
▪ HDCP status (enable / disable), Test pattern settings, Signal
type, HDCP mode, PWR5V mode
▪ TPS mode
▪ PoE (enable / disable)
Audio settings (for I/O audio ports)
▪ Audio mode
▪ Mute, Volume, Balance, Gain
Microphone and advanced audio settings
▪ Mute, Volume, Balance, Gain, Panorama/Balance, Invert phase,
HPF, LPF, EQ
Phantom Power, Feedback (only for the microphone)
▪
▪ Ducker (only for the advanced audio input channel)
▪ Delay, mono (only for the advanced audio output channel)
RS-232 settings
▪ Port name
▪ Rs232Mode (Command injection / Control / Disconnect)
Command injection status (enable / disable)
▪
▪ Command injection port number
▪ Baud rate, Data bits, Parity, Stopbits, Control protocol
Applied firmware package: v1.3.0 | LDC software: v2.4.2
MMX8x4-HT series – User's Manual
2
3
1
2
IR settings
▪ Port name
Port status (enable / disable)
▪
Command injection status (enable / disable)
▪
▪ Command injection port number
Ethernet settings
▪ Port name, Port status (enable / disable)
GPIO settings
4
Port name, Direction, Input level
▪
Relay settings
3
Connection state
▪
USB Settings
5
▪ Host select
Power switch delay
▪
5V enable on the device
▪
Other settings
User EDID data
▪
▪ Emulated EDID list
▪ Event manager: All Events' settings (1-100)
All Presets' settings (1-6)
▪
Device label
▪
▪ Rotary direction, Display brightness, Control lock
Values of the variables
▪
In MMX8x4-HT420M and MMX8x8-HDMI-4K-A and MMX8x8-HDMI-
1
4K-A-USB20 models.
In MMX8x4-HT400MC and MMX8x4-HT420M models.
2
In MMX8x4-HT420M model.
3
4 In MMX8x4-HT420M and MMX8x8-HDMI-4K-A-USB20 models.
In MMX8x8-HDMI-4K-A-USB20 model.
5
184