Advanced Analog Output Channel; Legend Of Advanced Analog Output Channel - Lightware MMX8x4-HT420M User Manual

   
6. Software Control – Lightware Device Controller
6.8.13. Advanced Analog Output Channel
This settings refers to the balanced analog output port.
w
q
9
8
1 2 3
4
5
6
7
Applied firmware package: v1.3.0 | LDC software: v2.4.2
MMX8x4-HT series – User's Manual
6.8.14. Legend of Advanced Analog Output Channel
1 Channel name Displays the channel name. All the settings below belongs to the channel.
2 Mono button The same audio is transmitted to both left and right channel.
3 Phase invert It inverts the phase of the input signal.
button
4 Preset button Clicking on this button opens a Channel Preset window where the channel presets
can be saved, loaded or deleted. For more details see
5 Delay button This feature makes possible to add delay (ms) into the audio output to avoid echo
effects in larger rooms. Max. value: 25ms, steps 1ms.
6 EQ section: The equalizer section is for set the proper rate of the different frequencies (high: 8kHz;
HIGH, HMID, high-mid: 1.6 kHz, low-mid: 400 Hz, low: 100Hz). See more details in
LMID, LOW (EQ) Settings
7 Factory defaults Restore the factory default settings on the microphone channel. For more details
restore button see
8 Output volume Sets the volume of the output signal between -80dB and +10dB. It also can be
fader controlled by scrolling or writing the value in the text field.
9
Signal indicator See more details in
chart
q Mute/Unmute Mutes/unmutes the output.
w Balance section Balance can be set in this section. For more details, see
Settings.
#analogaudio #balance volume #advancedaudio
section.
Factory Default Settings.
Panorama or Balance Settings section.
71
Channel Presets section.
Equalization
Panorama or Balance