System Commands; Query The Product Name; Query The Device Label; Set The Device Label - Lightware MMX8x4-HT420M User Manual

   
8. LW3 Programmers' Reference
8.4. System Commands
8.4.1. Query the Product Name
The name of the product is a read-only parameter and cannot be modified.
Command and Response
ç GET·/.ProductName
pr·/.ProductName=<product_name>
æ
Example
ç GET /.ProductName
æ pr /.ProductName=MMX8x4-HT420M
8.4.2. Query the Device Label
Command and Response
GET·/MANAGEMENT/UID/DeviceLabel=<custom_name>
ç
pw·/MANAGEMENT/UID/DeviceLabel=<custom_name>
æ
Parameters
<custom_name> The Device Label can be 39 character long and ASCII characters are allowed. Longer
names will be truncated.
Example
ç GET /MANAGEMENT/UID.DeviceLabel=MMX_Control_room
æ pw /MANAGEMENT/UID.DeviceLabel=MMX_Control_room
8.4.3. Set the Device Label

ATTENTION! The device label can be changed to a custom text which is displayed in many windows of
the LDC. This writable parameter is not the same as the ProductName parameter.
Command and Response #devicelabel
SET·/MANAGEMENT/UID/DeviceLabel=<custom_name>
ç
pw·/MANAGEMENT/UID/DeviceLabel=<custom_name>
æ
Parameters
<custom_name> The Device Label can be 39 character long and ASCII characters are allowed. Longer
names will be truncated.
Example
ç SET /MANAGEMENT/UID.DeviceLabel=MMX_Control_room
æ pw /MANAGEMENT/UID.DeviceLabel=MMX_Control_room
MMX8x4-HT series – User's Manual
8.4.4. Query the Serial Number
Command and Response
ç GET·/.SerialNumber
pr·/.SerialNumber=<serial_nr>
æ
Example
ç GET /.SerialNumber
æ pr /.SerialNumber=00005484
8.4.5. Querying the Package Version
This command shows the installed firmware package version.
Command and Response
ç GET·/MANAGEMENT/UID.PackageVersion
pr·/MANAGEMENT/UID.PackageVersion=<package_version>
æ
Example
ç GET /MANAGEMENT/UID.PackageVersion
æ pr /MANAGEMENT/UID.PackageVersion=1.6.0b9 r61
8.4.6. Querying the CPU Firmware Version
Command and
ç GET·/SYS/MB.FirmwareVersion
pr·/SYS/MB.FirmwareVersion=<firmware_version>
æ
Example
ç GET /SYS/MB.FirmwareVersion
æ pr /SYS/MB.FirmwareVersion=1.2.0b3
8.4.7. Identify the Device
Calling the method results Device identified! message on the LCD screen. The feature helps to identify the
device itself in the rack shelf.
Command and Response
ç CALL·/MANAGEMENT/UI:identifyMe()
æ mO·/MANAGEMENT/UI:identifyMe
Example
ç CALL /MANAGEMENT/UI:identifyMe()
æ mO /MANAGEMENT/UI:identifyMe
Applied firmware package: v1.3.0 | LDC software: v2.4.2
Response #firmwareversion
108