Lightware MMX8x4-HT420M User Manual page 169

   
9. Firmware Upgrade
Step 1 – Select the Firmware Package
Click on the Select Firmware Package button and navigate to the
location where the LFP2 file was saved. When you click on the
name of package, the preview of the release notes are displayed
in the right panel.
After the package file is loaded, the list is filtered to show the compatible devices only. The current firmware
version of the device is highlighted in orange if it is different from the version of the package loaded.

INFO: If you start the upgrade by double-clicking on the LFP file, above screen will be loaded right away.
MMX8x4-HT series – User's Manual
SELECT FIRMWARE PACKAGE
Applied firmware package: v1.3.0 | LDC software: v2.4.2
The Meaning of the Symbols
Show The log about the upgrading process of the device

details can be displayed in a new window.
Service The device is in bootload mode. Backup and restore
mode cannot be performed in this case.
Step 2 – Select the desired devices for upgrading
Select the devices for upgrading; the selected line will be highlighted in green.
If you are not sure which device to select, press the Identify me
for 10 seconds. The feature helps to find the device physically.
Step 3 – Check the upgrade parameters
Clicking on the Parameters button, special settings will be available like:
Creating a backup about the configuration,
▪
▪ Restore the configuration or reloading the factory default settings after the firmware upgrade.
▪ Uploading the default Miniweb (if available)
Enter the password for the Cleartext login.
▪
INFO:
Hereby entered password will be used for all the selected devices where the Cleartext login is
enabled. If the password is incorrect, a window will appear to get the correct one at each device during
the upgrade.
Please arrange the settings carefully.
169
button. It makes the front panel LEDs blink

PARAMETERS
#builtinweb #miniweb #web