Table of Contents
Advertisement
2.2. Rear view
Equipotential connector
9
DC Voltage LEDs
1
Power connector
2
1
DC voltage indicators
2
Power connector
3
Serial port
4
Ethernet port
5
Input connectors
6
Output connectors
7
CPU live LED
8
Reset button
9
Equipotential connector
Info: MX12x12DVI-Plus rear panel differs only in that it has 12 input and 12 output connectors.
Info: MX9x9DVI-Plus rear panel differs only in that it has 9 input and 9 output connectors.
Section 2. Controls and connections
Input connectors
5
Serial port
3
4
Ethernet port
Figure 2-2. Rear view
LED indicators for internal DC power voltages.
Standard IEC-320 C14 power connector. The router works with 100
to 240 Volts, 50 or 60 Hz power sources. The fuse can be replaced
with F3.15A type only!
9 pole D-SUB female connector. Can be ordered with RS-232 or
RS-422 control. See section
Locking RJ45 connector. Remote control port for connecting the unit
to Local Area Network (LAN). See section
information.
29 pole DVI–I digital-only female receptacle connectors. Connect
DVI source devices to these connectors. See section
12
for more information.
29 pole DVI–I digital-only female receptacle connectors. Connect
DVI sink devices to these connectors. See section
for more information.
Continuously blinking LED if the CPU works properly.
Resets all internal hardware elements.
Plug connector for potential equalization. See section
12
for more information.
Standalone MX DVI-Plus family
CPU LIVE LED
Output connectors
6
2.3.4
on page
2.3.5
User's Manual
7
Reset button
8
13
for more information.
on page
13
for more
2.3.1
on page
2.3.2
on page
12
2.3.3
on page
Page 11 / 89
Advertisement
Table of Contents
