Advanced View - Lightware MMX8x4-HT420M User Manual

   
6. Software Control – Lightware Device Controller
6.16. Advanced View
Advanced view is the surface for displaying the LW3 protocol tree. Commands and specific parameters
(which are not available on the graphical user interface of the LDC) can be run and set by the controlling
tools.
1 2
7
#advancedview #terminal
3 4 5 6
Applied firmware package: v1.3.0 | LDC software: v2.4.2
MMX8x4-HT series – User's Manual
1 LW3 Protocol Help
2 Terminal Window
3 Protocol Tree
4 Edit Mode
5 Node List
6 Warn Option
7 Command Line
Short description about the command types and LW3 Protocol.
Commands and responses. Sent command starts with ">" character,
received response starts with "<" character. The content of the window can
be emptied by the Clear button. If the Autoscroll option is ticked, the list is
scrolled automatically when a new line is added. Place the mouse cursor
on a line to display the date and time stamp in a Hint field.
LW3 protocol tree; select an item to see its content.
The default appearance is the Edit mode. If the option is unticked the values
or parameters cannot be changed.
Parameters and nodes of the selected item are shown. The commands
typed in these fields are escaped automatically.
The LDC can be set to warn the user before enable the Edit mode.
The commands typed in this line are not escaped automatically.
94