Aux Analog Audio Input Volume Setting; Aux Analog Audio Input Balance Setting; Aux Analog Audio Input Gain Setting; Aux Analog Audio Output Mute Settings - Lightware MMX8x4-HT420M User Manual

   
8. LW3 Programmers' Reference
8.9.3. AUX Analog Audio Input Volume Setting
This command sets the volume in dB
Command and Response
SET·/MEDIA/AUDIO/<in>/ADCVOLUME.VolumedB=<volume_dB>
ç
pw·/MEDIA/AUDIO/<in>/ADCVOLUME.VolumedB=<volume_dB>
æ
Parameters
<volume_dB> Volume can be set between -48.18dB and 0.00dB.
Example
ç SET /MEDIA/AUDIO/I6/ADCVOLUME.VolumedB=-1
æ pw /MEDIA/AUDIO/I6/ADCVOLUME.VolumedB=-1
8.9.4. AUX Analog Audio Input Balance Setting
Command and Response #balance
SET·/MEDIA/AUDIO/<in>/ADCVOLUME.Balance=<balance_value>
ç
pw·/MEDIA/AUDIO/<in>/ADCVOLUME.Balance=<balance_value>
æ
Parameters
<balance_value> The balance value can be set between -100 (left) and +100 (right). Zero balance
means the center setting.
Example
ç SET /MEDIA/AUDIO/I6/ADCVOLUME.Balance=100
æ pw /MEDIA/AUDIO/I6/ADCVOLUME.Balance=100
8.9.5. AUX Analog Audio Input Gain Setting
This command sets the input gain in dB scale.
Parameters
<gain_dB> The gain can be set between 0.00dB and 24.00dB.
Command and Response
SET·/MEDIA/AUDIO/<in>/ADCVOLUME.Gain=<gain_dB>
ç
pw·/MEDIA/AUDIO/<in>/ADCVOLUME.Gain=<gain_dB>
æ
Example
ç SET /MEDIA/AUDIO/I6/ADCVOLUME.Gain=1.00
æ pw /MEDIA/AUDIO/I6/ADCVOLUME.Gain=1.00
scale. #volume
Applied firmware package: v1.3.0 | LDC software: v2.4.2
MMX8x4-HT series – User's Manual
8.9.6. AUX Analog Audio Output Mute Settings
Command and Response #mute #analogaudio
SET·/MEDIA/AUDIO/<in>.DACVOLUME.Mute=<mute_status>
ç
pw·/MEDIA/AUDIO/<in>.DACVOLUME.Mute=<mute_status>
æ
Parameters
<mute_status> true: muted;
false: unmuted
Example
ç SET /MEDIA/AUDIO/I6/DACVOLUME.Mute=true
æ pw /MEDIA/AUDIO/I6/DACVOLUME.Mute=true
8.9.7. AUX Analog Audio Output Volume Setting
This command sets the volume in dB
Command and Response
SET·/MEDIA/AUDIO/<in>/DACVOLUME.VolumedB=<volume_dB>
ç
pw·/MEDIA/AUDIO/<in>/DACVOLUME.VolumedB=<volume_dB>
æ
Example
ç SET /MEDIA/AUDIO/I6/DACVOLUME.VolumedB=-1
æ pw /MEDIA/AUDIO/I6/DACVOLUME.VolumedB=-1
Parameters
<volume_dB> Volume can be set between -95.62dB and 0.00dB.
8.9.8. AUX Analog Audio Output Balance Setting
Command and Response #balance
SET·/MEDIA/AUDIO/<in>/DACVOLUME.Balance=<balance_value>
ç
pw·/MEDIA/AUDIO/<in>/DACVOLUME.Balance=<balance_value>
æ
Example
ç SET /MEDIA/AUDIO/I6/DACVOLUME.Balance=-100
æ pw /MEDIA/AUDIO/I6/DACVOLUME.Balance=-100
Parameters
<balance_value> The balance value can be set between -100 (left) and +100 (right). Zero balance
means the center setting.
scale. #volume
118