Matrix Frame - Rear View - Lightware MX2M-FR24R User Manual

   
2. Product Overview
2.2. Matrix Frame - Rear View
MX2M-FR24R
9
8
7
6
5
1 Auxiliary board Board slots for the
slots boards only.
2 Input board Board slots for the AV
slots boards and low-speed boards either.
3 Output board Board slots for the AV
slots output boards and low-speed boards either.
Hybrid Modular Matrix Switcher series – User's Manual
4
Auxiliary (AUX) Boards. These slots support low-speed
Input (IB) Boards. These slots support high-speed input
Output (OB) Boards. These slots support high-speed
Applied firmware package: v1.0.0 | LDC software: v2.4.0b3
4 Power supply
units
5 Uplink /
1
Secure control
connector
Uplink
6
connector
2
7 Secure control
connector
RS-232
8
connector
9 Service button
3
Layout of the Input/Output Board Slots and Power Drawer Slots
The following figure shows the
layout of the auxiliary (AUX), input
(IB), output (OB) board slots and
the order of the PSUs on the rear
side of the matrix.
See more details
installation of the I/O boards in the
Board Installation and Handling
section.
See more details
installation of the power supply
units in the PSU Installation
Hot swap slots for Power Supply Unit (PSU). The matrix has redundant PSUs
which can be switched on and off without interrupting the video transmission.
Using one or both of the PSUs at the same time is also possible.
The double PSU allows to connect them for two different AC power lines to
ensure the continuous power for the matrix.
Neutrik etherCON Ethernet connector with 1 Gbps Ethernet connection to control
the device, firmware upgrade purpose and for user Ethernet access.
Neutrik etherCON Ethernet connector with 1 Gbps Ethernet connections for user
Ethernet access.
Neutrik etherCON Ethernet connector with 1 Gbps Ethernet connection to control
the device and firmware upgrade purpose.
9-pole D-SUB connector for serial communication to control the device.
Hidden button for special operations.
about the
about the
section.
15