Ports Menu - Lightware MMX8x4-HT420M User Manual

   
3. Front Panel Control
3.2.2. Ports Menu
When entering the menu the available video input and output ports are listed. The
icons display information about the port and the video signal (see below table).
Select the desired port and enter to see the submenu.
Grey
Description
icon
Source/sink is not
connected
No audio signal in the
video stream
Signal is not present
Signal is not encrypted
with HDCP
The port is unmuted
Video Status Submenu for Input Ports
The most important properties of the chosen input port can be checked in this
submenu:
Parameter
+5V present Present/ Not present
Signal Present Present/ Not present/Unknown
HDCP Status Encrypted/ Not encrypted/Unknown
Embedded Audio Present/ Not present/Unknown
Pixel Clock (MHz) No signal/ [x] MHz
Unknown/ No signal/
Active Resolution
[x]x[y][i\|p][f]
Unknown/ No signal/
Total Resolution
[x]x[y]
White
Description
icon
Source/sink is
connected
Audio is embedded in
the video stream
Signal is present
Signal is encrypted
with HDCP
The port is muted
Input port
MMX8x4-HT series – User's Manual
Video Settings Submenu for Input Ports
▪ HDCP Enable (Disabled / Enabled)
Video Status Submenu for Output Ports
The most important properties of the chosen output port can be checked in this
submenu:
Hotplug detect
Signal Present
HDCP Status
Embedded Audio
Pixel Clock (MHz)
Active Resolution
Total Resolution
Video Settings Submenu for Output Ports
Signal type (Auto / DVI / HDMI)
▪
▪ +5V Enable (Always on / Always off / Auto)
▪ HDCP Mode (Auto / Always on)
Applied firmware package: v1.3.0 | LDC software: v2.4.2
#hdcp
Parameter HDMI OUTPUT
Present/ Not present
Present/ Not present/Unknown
Encrypted/ Not encrypted/Unknown
Present/ Not present/Unknown
No signal [x] MHz
Unknown/ No signal
[x]x[y][i\|p][f]
Unknown/ No signal/ [x]x[y]
#signaltype #hdcp
22