Chapter 4 - AdeptVision sAVI Option
4.5
Camera Cable Pin and Signal Information
This section provides the pin and signal information for the connectors and cables
associated with the AdeptVision product.
•
Table 4-1
•
Table 4-2
Breakout Cable.
•
Table 4-3
•
Table 4-4
camera connectors for the two-camera breakout cable.
•
Table 4-5
camera and strobe/power connectors for the four-camera breakout cable. The
table is organized by camera number.
•
Table 4-6
by the 44-pin connector.
74
describes the Hirose connector on the breakout cables.
describes the Strobe and Power connector on the standard Four-Camera
describes the 10-meter camera extension cable.
describes signal information between the 44-pin connector and the
describes signal information between the 44-pin connector and the
contains information similar to
Adept SmartController User's Guide, Rev. E
Table
4-5, but it is organized numerically