Dedicated Maps (Quad/Octal Fxo Module) - ADTRAN Atlas 550 System Manual

Adtran atlas 550: user guide
Hide thumbs Also See for Atlas 550:
Table of Contents

Advertisement

Section 4 User Interface Guide
DNIS D
ELAY
Write security: 3; Read security: 5
(Available only when
wink in response to the 2W going off hook (after ringing) before we send off hook in the RBS
signaling. This field is only valid for E&M conversion. The timing is as follows:
Rx AB
Tx AB
The following submenu item becomes visible when
DNIS W
T
INK
IMEOUT
Write security: 3; Read security: 5
When
DNIS D
if the FXS does not detect an off hook. This option, when
without winking until the call is answered.
Trunks can be taken out of service by telco if there is No wink. Use caution when disabling
this option.
D
M
EDICATED
APS
D
M
(FXO) > C
EDICATED
APS
Write security: 3; Read security: 5
Enters the dedicated map connections. Press <Enter> to activate the submenus.
D
M
(FXO) > C
EDICATED
APS
Write security: 3; Read security: 5
Specifies the configuration for the
Quad/Octal FXO Option Module, depending on the application:
# P
ORTS
Write security: 3; Read security: 5
Defines ports to be used for this connection.
238
is enabled.) Defines the time we delay after transmitting a
E&M C
ONVERSION
W
DNIS Delay
is
, a wink will be returned to the originating switch after 5 seconds
E
ELAY
NABLED
(Q
/O
FXO M
UAD
CTAL
/E
REATE
DIT
/E
REATE
DIT
connection. The following selections may apply to the
T
/F
O
ROM
© 2004 ADTRAN, Inc.
Off Hook
is activated:
DNIS D
ELAY
D
ISABLED
)
ODULE
M
> C
APS
ONNECTS
M
> C
APS
ONNECTS
ATLAS 550 System Manual
, allows the FXS port to ring
> T
/F
C
O
ROM
ONFIG
61200305L2-1B

Advertisement

Table of Contents
loading

Table of Contents