ADTRAN Atlas 550 System Manual page 85

ATLAS 550 System Manual
S C > SNMP > T
YSTEM ONFIG
Write security: 3; Read security: 5
Sets the minimum severity level required for a system event to generate an SNMP trap. If a trap event
occurs with a severity level equal to or more severe than the trap type's current threshold setting, the event
is sent as an SNMP trap. (For a listing of all MIBs containing traps and their severity levels, check the
ADTRAN Support website at www.adtran.com. Click Service/Support > Technical Support > ATLAS
Products > ATLAS 550 > MIBs.) The available selections for the threshold levels are:
, ,
M M W
AJOR INOR ARNING
S C > SNMP > T
YSTEM ONFIG
Write security: 3; Read security: 5
To deliver the SNMP trap packet with the
. If you are using T-Watch PRO, define the
N
ORMAL
with ".ADLP ADDRESS." Within the SNMP trap packet, this field is automatically
C N
OMMUNITY AME
updated before it is sent to the management station.
S C > SNMP > DS1 C
YSTEM ONFIG
Write security: 3; Read security: 5
Defines performance threshold values for DS1 Line and Path statistics recorded in a 15-minute interval.
Refer to the ADTRAN Enterprise MIB and the DS1 Extension MIB (These MIB listings are available on
the documentation CD or the ADTRAN website at
Click Service/Support >Technical Support > ATLAS Products > ATLAS 550 > MIBs.) If a statistic value
exceeds its threshold value, then the corresponding Alert Trap will be sent if the Alert Event is armed and
Alert Traps are enabled. These thresholds apply to all DS1 interfaces in the system.
S C > SNMP > DS1 C
YSTEM ONFIG
Write security: 3; Read security: 5
The DS1 performance monitor Threshold Value for the Current 15 minute Errored Seconds (ES)
parameter. The default value is 65 for an approximate BER level of 10E-5.
S C > SNMP > DS1 C
YSTEM ONFIG
Write security: 3; Read security: 5
The DS1 performance monitor Threshold Value for the Current 15 minute Severely Errored Seconds (SES)
parameter. The default value is 10 for an approximate BER level of 10E-5.
S C > SNMP > DS1 C
YSTEM ONFIG
Write security: 3; Read security: 5
The DS1 performance monitor Threshold Value for the Current 15 minute Severely Errored Framing
Seconds (SEFS) parameter. The default value is 2 for an approximate BER level of 10E-5.
S C > SNMP > DS1 C
YSTEM ONFIG
Write security: 3; Read security: 5
The DS1 performance monitor Threshold Value for the Current 15 minute Unavailable Seconds (UAS)
parameter. The default value is 10 for an approximate BER level of 10E-5.
61200305L2-1B
D
RAPS ESTINATION
, , and .
N I
ORMAL NFO
D
RAPS ESTINATION
C
OMMUNITY
URRENT
URRENT
URRENT
URRENT
URRENT
© 2004 ADTRAN, Inc.
> T F
RAP ILTERING
> S T
TATION YPE
unchanged, define the
N
AME
as
S T T-W
TATION YPE ATCH
P T
ERF HRESHOLDS
www.adtran.com for more MIB-specific information.
P T > C
ERF HRESHOLDS
P T > C
ERF HRESHOLDS
P T > C
ERF HRESHOLDS
P T > C
ERF HRESHOLDS
Section 4 User Interface Guide
,
D C
ISABLED
as
S T
TATION YPE
and append the
M
GMT
ES T
URRENT HRSH
SES T
URRENT HRSH
SEFS T
URRENT HRSH
UAS T
URRENT HRSH
,
RITICAL
85