Session Menu - ADTRAN Atlas 550 System Manual

ATLAS 550 System Manual

Session Menu

Click on to open the Telnet session.
S
ESSION
Connect
Opens dialog box for setting
parameters for a Telnet session. Also lets
P
ORT
you ,
E E A
DIT NTRY DD
stored entries. When the parameters are set, click
to make the connection. Click
C
ONNECT
to end the session.
Host Name
Accepts and stores host names. You may either enter a name, an IP address, or a domain name directly
from this field. Click on the drop-down arrow to display a complete list of previously stored host
names.
Port
Provides several port options. You may enter port numbers directly into this field to connect to
non-standard ports or select the drop-down combo-box to display the following options:
T
ELNET
E
CHO
D
ISCARD
D
AYTIME
C
HARGEN
Edit Entry
Changes either the unit name or the IP address of each host.
Press either
Tab, Return,
the IP address to move to the next field. If you press
or enter a period while the cursor is located in an IP field,
that field entry is deleted.
Add New
Prompts you for the same information as the
dialog box for new host. When enabled, the
request
D L
OMAIN OOK
name then appears in the
Delete
Removes a host name from the list; select the host name you want to remove, and, at the prompt, click
.
D
ELETE
Connect
Establishes the Telnet session.
61200305L2-1B
and
H N
OST AME
entry, and
N D
EW ELETE
C
ANCEL
establishes a Telnet session
provides a loopback for troubleshooting
bit bucket; discards data
returns the time
displays as a unique character stream; used for self-tests
or a ( ) after each number in
.
period
U
via a DNS server on the network, rather than specifying an IP address. The
U
P
field.
H N
OST AME
© 2004 ADTRAN, Inc.
Return
E E
DIT NTRY
(Domain Name Server) feature allows users to
DNS
SE
Section 8 ADTRAN Utilities
381