ADTRAN Atlas 550 System Manual page 316

Section 5 DLP-3
Perform the steps below in the order listed.
1. Log in to the system with maximum rights (details are in DLP-2).
2. From the S C
YSTEM
The next three steps will require confirmation after each change.
3. From the S C
YSTEM
enter the appropriate IP address.
4. From the S C
YSTEM
enter the appropriate Subnet Mask.
5. From the S C
YSTEM
Then enter the appropriate Default Gateway.
6. Press the left-arrow key to highlight the E
7. Escape out to the S
316
menu, select the E
ONFIG
/E menu, select the IP A
ONFIG THERNET
/E menu, select the S
ONFIG THERNET
/E menu, select the D
ONFIG THERNET
THERNET
C menu and log off by pressing <CTRL + L>.
YSTEM ONFIG
© 2004 ADTRAN, Inc.
P option and press <Enter>.
THERNET ORT
option and press <Enter>. Then
DDRESS
M
UBNET ASK
G
EFAULT ATEWAY
submenu. This action saves your changes.
ATLAS 550 System Manual
option and press <Enter>. Then
option and press <Enter>.
61200305L2-1B