ADTRAN Atlas 550 System Manual page 192

Section 4 User Interface Guide
R P
X ACKETS
Read security: 5
Number of packets received over this link.
C C
LEAR OUNTERS
Write security: 3; Read security: 5
Resets the Tx and Rx packet counters.
P M > P
ACKET ANAGER
Write security: 3; Read security: 5
Displays frame relay performance statistics for supported packet endpoint sublinks. These statistic fields
reflect the total count since cleared. These settings are not applicable for PPP or TBOP.
N
AME
Write security: 3; Read security: 5
Alphanumeric characters (up to 16 characters) to create a user-defined name for the sublink (PVC).
DLCI
Write security: 3; Read security: 5
Local address for each PVC as assigned by the carrier.
S
TATE
Write security: 3; Read security: 5\
Indicates if this particular sublink (PVC) has been defined as active by a full status poll, and also
indicates if the PVC is in backup mode.
A
CTIVE
I
NACTIVE
A /BU
CTIVE
I /BU
NACTIVE
T P
X CKTS
Write security: 3; Read security: 5
Total number of frame relay user data packets transmitted over this PVC.
R P
X CKTS
Write security: 3; Read security: 5
Total number of frame relay user data packets received over this PVC.
192
E > P
ACKET NDPNTS
PVC is active.
PVC is inactive.
PVC is active, but in backup mode.
PVC is inactive and in backup mode.
© 2004 ADTRAN, Inc.
> S
ERFORMANCE UBLINK
ATLAS 550 System Manual
S - F R
TATS RAME ELAY
61200305L2-1B