ADTRAN Atlas 550 System Manual page 105

ATLAS 550 System Manual
M (T1/PRI-1) > DS0 S
ODULES
Read security: 5
The DS0 status indicates usage on a DS0 basis. These options are read-only:
- Unallocated
* Inactive
+ Signaling mismatch
A Active B Channel
D Active D Channel
M Maintenance
N Dedicated (nailed)
O Off hook - originate (RBS)
R Ringing (RBS); Restart (ISDN)
W Waiting dial tone
M (T1/PRI-1) > DS0 A
ODULES
Read security: 5
Displays per-DS0 alarm status. These alarms usually indicate the failure to receive the protocol that has
been configured for the DS0.
- No Alarm DS0
D D Channel Alarm (ISDN)
F Frame Alarm (packet)
T TBOP Alarm (packet)
P PPP Alarm (packet)
M (T1/PRI-1) > S
ODULES
Read security: 5
Read-only field that indicates signaling of all 24 DS0s. The A/B bits for Rx (receive) and Tx (transmit)
DS0s are shown. Dashes display for those DS0s where robbed bit signaling (RBS) is not being transferred
by the ATLAS 550.
M (T1/PRI-1) > P
ODULES
Write security: 3; Read security: 5
The performance fields (either
performance measures as specified in ANSI T1.403 and AT&T TR54016 for the T1/PRI port. Except for
, these fields are all read-only. The monitored parameters include the following:
C
LR
P
RT
C
LR
61200305L2-1B
TATUS
LARMS
S
IG TATUS
C
ERFORMANCE URRENT
,
C 15-M
URRENT INUTE
Displays the port number
Clears performance information for the selected port
© 2004 ADTRAN, Inc.
Section 4 User Interface Guide
total, or total) provide status on key
24-H
OUR
105