ADTRAN Atlas 550 System Manual page 204

Section 4 User Interface Guide
T
EST
Write security: 3; Read security: 5
Displays the test mode for the PVC.
S
TART
Write security: 3; Read security: 5
The fixed duration that Test is not running and the DLCI is not configured for continuous in-band
delay measurement. To change this option, set
M
EASUREMENT
Delay Measurement option).
C D
ONT LY
Write security: 3; Read security: 5
The fixed duration
measurement. The following
S
TOP
Write security: 3; Read security: 5
The fixed duration
the current test.
D
URATION
Read security: 5
Shows the duration in seconds for the fixed-duration test.
R [MN/AV/MX D
ESULTS
Read security: 5
Displays the minimum, average, and maximum delay for the delay-measurement test. To display the
additional test results, place the cursor over this field and press <Enter > on the keyboard. The
displayed times are in milliseconds.
E P T
CHO KT X
Read security: 5
Displays the total number of test packets that have been transmitted.
E P R
CHO KT X
Read security: 5
Displays the total number of test packets that have been received.
204
(also see Packet Manager > Packet Endpnts > Config > Config - SDLC, In-band
is not running and the DLCI is configured for continuous in-band delay
T
EST
R
ESULTS
is running. The following
T
EST
]
LY
© 2004 ADTRAN, Inc.
D M
IAGNOSTIC ODE
menu accumulates these measurements.
field shows the time remaining in
D
URATION
ATLAS 550 System Manual
to
I - D
N BAND ELAY
61200305L2-1B