ADTRAN Atlas 550 System Manual page 336

Section 5 DLP-10
Perform the following steps in the order listed.
1. Connect to the ATLAS 550 using the RJ-48 ADMIN on the back of the ATLAS 550 or the DB-9 CRAFT
interface on the front of the ATLAS 550.
If you are not already connected to the unit's
VT100 compatible terminal or with a PC running VT100 emulation software, follow the procedure in
DLP-1, Connecting a VT100 Terminal or PC to the ADMIN or CRAFT Port. Connecting to the
or interface limits the configuration transfer procedure to XMODEM only.
CRAFT
2. Log in to the unit using the read-write password (see
3. Go to the S U
YSTEM
4. Set the T M
RANSFER
5. Select S C
AVE ONFIG
ATLAS 550 for the transfer download.
The following message is displayed: This will begin sending a copy of the current system
configuration.
6. Configure the VT100 terminal or terminal emulation software to R
7. View the C
URRENT
8. From the terminal emulation software, begin the XMODEM transfer by using the appropriate command
sequence. For Windows HyperTerminal, select T
path) and select XMODEM as the transfer method.
If necessary, refer to the terminal emulation software documentation for help.
When specifying the filename, ensure that the saved file has a .cfg extension;
otherwise, the file may not be available for uploading into other ATLAS 550 units.
Because XMODEM data is being transferred inband through the menu interface, the VT100 menus of
the ATLAS 550 will be inoperable from the
any time within the terminal emulation software. (Please consult the documentation provided by the
terminal emulation software to determine how to do this.)
9. When the transfer has successfully completed, I
and XMODEM D
OWNLOAD
336
menu and select C
TILITY
menu to XMODEM.
ETHOD
R to start the transfers. Enter Y to confirm the transfer and prepare the
EMOTELY
T S to verify the progress of the current transfer.
RANSFER TATUS
C displays in the P
OMPLETE
© 2004 ADTRAN, Inc.
or interface, either with a
ADMIN CRAFT
DLP-2, Logging in to the ATLAS 550,
T
ONFIGURATION RANSFER
ECEIVE
>R
RANSFER ECEIVE
or interfaces. You can cancel the update at
ADMIN CRAFT
displays in the C
DLE
T
REVIOUS RANSFER
ATLAS 550 System Manual
menu; press <Enter>.
(and prompt for a filename).
F . Enter the filename (including
ILE
T S
URRENT RANSFER TATUS
S field.
TATUS
61200305L2-1B
ADMIN
for details).
field