ADTRAN Atlas 550 System Manual page 302

Section 4 User Interface Guide
D P (C B
IAL LAN KT ACKUP
Write security: 3; Read security: 5
The amount of time to delay after clearing an alarm before coming out of backup. This only applies to
originating endpoints. If the circuit goes into alarm before this time has expired, the endpoint will remain
in backup.
D P (C B
IAL LAN KT ACKUP
Write security: 3; Read security: 5
The backup endpoint will attempt this many retries before giving up and declaring a backup failure. This
only applies to originating endpoints.
D P (C B
IAL LAN KT ACKUP
Write security: 3; Read security: 5
The amount of time delayed between a failed backup call and the redial. This only applies to originating
endpoints.
D P (C B
IAL LAN KT ACKUP
Write security: 3; Read security: 5
Use this menu to schedule the times when backup is enabled. The following selections are available for the
menu item.
E S
NABLE CHEDULE
E T
NABLE IME
Write security: 3; Read security: 5
This is the time of day to enable dial backup.
D T
ISABLE IME
Write security: 3; Read security: 5
This is the time of day to disable dial backup. If the disable time is earlier than the enable time,
backup monitoring will be active across midnight.
D E
AYS NABLED
Write security: 3; Read security: 5
Use this record to enable/disable backup monitoring on particular days of the week.
D P (C B
IAL LAN KT ACKUP
Write security: 3; Read security: 5
This only applies to originating endpoints. Use this menu to schedule regularly occurring test calls. The
following selections are available for the
P
ERIOD
Write security: 3; Read security: 5
How often test calls are to be made
302
) > U T > I
SER ERM FCE
) > U T > I
SER ERM FCE
) > U T > I
SER ERM FCE
) > U T > I
SER ERM FCE
) > U T > I
SER ERM FCE
menu item.
T C
EST ALL
© 2004 ADTRAN, Inc.
ATLAS 550 System Manual
C > R
ONFIG ESTORE
C > M N
ONFIG AX UM
C > R T
ONFIG EDIAL IMER
C > E S
ONFIG NABLE
C > T C
ONFIG EST ALL
D
ELAY
R
EDIALS
CHEDULE
61200305L2-1B