Dlp-8 Saving The Current Configuration Using Tftp - ADTRAN Atlas 550 System Manual

DLP-8 Saving the Current Configuration Using TFTP

Introduction
The ATLAS 550 supports configuration transfers from the unit (via the 10/100BaseT
a TFTP server located on the network. This DLP provides the steps for a successful configuration transfer
using the port and a TFTP server.
ETHERNET
Tools and Materials Required
• A PC with a Telnet client software
• A TFTP server accessible on the local network (A TFTP server is provided with the unit as part of the
ADTRAN Utilities software).
To prevent electrical shock, do not install equipment in a wet location or during a
lightning storm.
Electronic equipment can be damaged by static electrical discharge. Before handling it,
put on an antistatic discharge wrist strap to prevent damage to electronic components.
Place equipment in antistatic packing material when transporting or storing. When
working on equipment, always place it on an approved antistatic mat that is electrically
grounded.
61200305L2-1B © 2004 ADTRAN, Inc.
port) to
ETHERNET
331