Modules - ADTRAN Atlas 550 System Manual

ATLAS 550 System Manual
S U > F
YSTEM TILITY
Write security: 0; Read security: 0
Resets the entire system to the factory default settings. To reset the system, press
command, press . When you select this command, the following message displays:
N
This will delete all configuration settings. ADTRAN recommends making a backup
copy of the configuration before defaulting the system.
M
ODULES
Write security: 3; Read security: 5
The menu provides status information and menu options that allow you to configure and control
M
ODULES
the installed option modules as well as the network ports (see Figure 8).
If you install a module in a slot, then want to install a different type of module in the slot,
you must set this field to
If a module is installed, the module type automatically shows the name of the installed
module, and it cannot be set to any other option.
61200305L2-1B
D S
ACTORY EFAULT YSTEM
Figure 8. Modules Menu
E
MPTY
© 2004 ADTRAN, Inc.
before selecting another module type.
Section 4 User Interface Guide
. To cancel this
Y
101