Dedicated Maps (E1/Pra Network Interface) - ADTRAN Atlas 550 System Manual

ATLAS 550 System Manual
D M
EDICATED APS
D M (E1/PRA) > C
EDICATED APS
Write security: 3; Read security: 5
Enters the dedicated map connections. Press <Enter> to activate the submenus.
D M (E1/PRA) > C
EDICATED APS
Write security: 3; Read security: 5
Specifies the configuration for the
E1/PRA Network Interface Module, depending on the application:
TS0 S
ELECTION
Write security: 3; Read security: 5
Defines TS0s for an E1 port. Use this field to define the TS0s for this connection. You can enter the
TS0s in several ways. For example, to enter TS0s one through five, enter
enter .
1,5
TS0 A
VAILABLE
Write security: 3; Read security: 5
Indicates which TS0s of the E1 are assigned. TS0 assignment is based on the following items:
This TS0 is available. The digit that displays in this field represents the last digit of
D 0-9
IGIT
the TS0 number.
This TS0 has been requested for this connection, but the TS0 is not yet activated for
*
this port.
This TS0 is used by this port in this connection and is currently activated.
!
This TS0 is used in the switched D
S
This TS0 is used in the switched D
S
This TS0 is already used in this D
N
This TS0 is already used in this D
N
TS0 R
ATE
Write security: 3; Read security: 5
Sets the TS0 rate to either 56 or 64 kbps. This field is only valid for E1 ports mapped to a
.
E
NDPNT
61200305L2-1B
(E1/PRA N
ETWORK
/E
REATE
/E
REATE
connection. The following selections may apply to the
T /F
O ROM
© 2004 ADTRAN, Inc.
I )
NTERFACE
M > C
DIT APS ONNECTS
M > C
DIT APS ONNECTS
P .
IAL LAN
P and conflicts with this connection.
IAL LAN
M .
EDICATED AP
M and conflicts with this connection.
EDICATED AP
Section 4 User Interface Guide
> T /F C
O ROM ONFIG
. For TS0s one and five,
1-5
P
KT
235